background image

Painting the cabinet

1. Apply one coat of primer to the speaker cabinet. You do not need to apply primer if you use “PAINT FOR 

PLASTIC” or “DIRECT-TO-PLASTIC” plastic paint marked “NO PRIMER NEEDED”. 

2. Allow the first coat of primer to dry completely. 

3. Apply a second coat of primer. 

4. Allow the second coat of primer to dry completely. 

5. Apply the finish color. 

6. Allow the paint to dry completely. 

7. Carefully remove all masking material.

Painting the grille

1, Apply the finish color to the grille, making sure that the grille holes remain free of paint. Clogging the grille 

holes may diminish the sound quality. You do not need to apply any primer. 

2. Allow the paint to dry completely. 

3. Remount the grille on the speaker. 

CAUTION

The aluminum  grilles are easy to bend out of shape. Please be careful when replacing the grille on the speaker, 

using only the minimum amount of force necessary.

Type

2-way Acoustic Suspension 

Speaker

Woofer

6-1/2” High Compliance P.P Mica Filled Cone and Rubber Surround 

Tweeter

1” PEI Dome x 2 

Frequency Range

60 Hz to 30,000 Hz 

Impedance

6 ohms 

Nominal Input

40 W 

Maximum Input

120 W 

Sensitivity (dB/2.83v. 1m)

87 dB 

Dimension (H x W x D)

7-7/16” x 10-1/4” x 6-25/32” (188.67 x 260.12 x 172 mm) 

Weight

5.07 lbs (2.3 kg) 

Magnetic Shielding

No

*Specifications subject to change without notice due to product improvements.

SPECIFICATIONS 

9

Содержание NS-AW570 - Left / Right CH Speakers













Отзывы: