background image

E-

3

English

SPEAKERS

A

B

L

R

+

+

+

CONNECTIONS TO YOUR AMPLIFIER

 Before making connections, make sure that the amplifier is switched off.

CONNECTIONS

• Connect the screw-type input terminals at the rear of the

speakers to the speaker output terminals of the amplifier
(or receiver) with the speaker cable.

• Connect the (+) terminals on the amplifier (or receiver)

and the speakers using one side of the cable. Connect
the (–) terminals on both components using the other
side of the cable.

• Connect one speaker to the left (marked L) terminals of

your amplifier, and another speaker to the right (marked
R) terminals, making sure not to reverse the polarity
(+, –). If one speaker is connected with reversed polarity,
the sound will be unnatural and lack bass.

How to connect:

1

Loosen the knob.

2

Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.

3

Insert the bare wire.

4

Tighten the knob and secure the cables.
Test the firmness of the connection by pulling lightly on
the cables at the terminal.

Note:
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or both
of them.

NS-325F

NS-325F

Speakers output
terminals of the
amplifier

Amplifier or

Receiver

Loosen

Tighten

When using a banana plug

1

Remove the cover by pulling it toward you.

2

Tighten the terminal knob.

3

Simply insert the banana plug into the terminal.

Banana plug

2

1

3

(L)

(R)

Black (–)

Red (+)

NS-325F-EN

6/20/05, 12:26 AM

3

Содержание NS-325F

Страница 1: ...and low with respect to the floor Do not push or apply pressure to the side of the speaker when moving or lean objects against the side of the speaker Do not sit on or set objects on top of the speaker PRECAUTIONS WHEN POSITIONING THE SPEAKERS Vibrations or jolts associated with earthquakes and other phenomena or activities may cause the speaker to fall over For safety reasons using commercially a...

Страница 2: ...eaker At this time screw it untightly so that the stand can still be moved 2 Put the 4mm wood screw through the other hole on the stand and screw it into the other hole on the base of the speaker 3 Tighten both of the screws firmly 4 Attach a pad to the bottom of the end portion of the stand 5 Attach the other stands to the other corners of the base of the speaker in the same way and confirm that ...

Страница 3: ...not to reverse the polarity If one speaker is connected with reversed polarity the sound will be unnatural and lack bass How to connect 1 Loosen the knob 2 Remove the insulation coating at the extremity of each speaker cable by twisting the coating off 3 Insert the bare wire 4 Tighten the knob and secure the cables Test the firmness of the connection by pulling lightly on the cables at the termina...

Страница 4: ...16 x 38 3 4 x 12 13 16 Weight 16 kg 35 lbs 5 oz Specifications subject to change without notice due to product improvements Care should be taken not to exceed the input power values noted above REMOVING THE FRONT COVER Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners Using as front speakers in a multi channel system P...

Отзывы: