Perio
d
ic maintenance an
d
a
d
justment
6-17
6
b
e operate
d
without the air filter
element installe
d
, otherwise the
piston(s) an
d
/or cylin
d
er(s) may
b
ecome excessively worn.
[ECA10482]
5. Install the air filter case cover by
installing the screws.
Cleanin
g
the air filter check hose
1. Check the hose on the rear side of
the air filter case for accumulated
dirt or water.
2. If dirt or water is visible, remove
the hose from the clamp, clean it,
and then install it.
Cleanin
g
the V-
b
elt case air filter el-
ement
1. Place the vehicle on the center-
stand.
2. Remove the screws, and then pull
the V-belt case air filter element
cover outward and away from the
V-belt case.
3. Pull the V-belt case air filter ele-
ment out, and then clean it with
solvent. After cleaning, remove
the remaining solvent by squeez-
ing the element.
WARNING! Use
only a
d
e
d
icate
d
parts cleanin
g
solvent. To avoi
d
the risk of fire
or explosion,
d
o not use
g
aso-
line or solvents with a low flash
point.
[EWA10432]
NOTICE:
To avoi
d
d
ama
g
in
g
the air filter element,
han
d
le it
g
ently an
d
carefully,
an
d
d
o not twist it.
[ECA10522]
4. Apply oil of the recommended
type to the entire surface of the
sponge material, and then
squeeze the excess oil out.
1. Air filter check hose
1
1. V-belt case air filter element cover
2. Screw
2
2
1
1. V-belt case air filter element
1
U2DSE0E0.book Page 17 Thursday, March 19, 2015 10:34 AM