Yamaha NHB32-C, Руководство по обслуживанию

Страница: 30 / 73

NHB32-C
30
2.2 Jitter measurement
Measure the jitter with the MASTER CLOCK set to
“NETWORK” as follows.
q
Set the MASTER CLOCK to “NETWORK”.
w
Measure the Fs jitter value at the CH1/2 output
of AES/EBU1.
e
Check to ensure that the “LOCK” LED is lit.
Measure the jitter with the MASTER CLOCK set to
“WORDCLOCK IN” as follows.
q
Set the MASTER CLOCK to “WORDCLOCK IN”.
w
Measure the Fs jitter value at the CH1/2 output
of AES/EBU1.
e
Check to ensure that the “LOCK” LED is lit.
Measure the jitter with the MASTER CLOCK set to
“AES/EBU” as follows.
q
Connect OUT of the AES/EBU unit to the CH1/2
(3/4, 5/6, 7/8) input of AES/EBU1 (2, 3, 4).
w
Set the MASTER CLOCK to 1/2 (3/4, 5/6, 7/8) of
AES/EBU1 (2, 3, 4).
e
Measure the Fs jitter value at the CH1/2 (3/4, 5/
6, 7/8) output of AES/EBU1 (2, 3, 4).
r
Check to ensure that the “LOCK” LED is lit.
3. Factory settings before shipment
q
POWER SW: OFF
w
UNIT ID: 0
e
75
Ω
: ON
1. Preparation
1.1 Conditions
Unless otherwise specified, use the following conditions.
UNIT ID switch setting : “0”
WORD CLOCK IN 75
Ω
switch setting : “ON”
MASTER CLOCK setting: “NETWORK”
PATCH setting: “00”
Use DME32 as the word clock signal source.
Insert “MYT8-AE” into the slot 1 of DME32.
Set MASTER CLOCK of DME32 to “INTERNAL”.
1.2 Test program
Specify the TEST PROGRAM when performing inspections
using the test program.
Execute of the TEST PROGRAM to confirm that there is no
NG item.
1.3 Firmware version
The version of the firmware for NHB32-C (for jigs) used for
inspection is also specified as follows.
1.3.1 Confirmation of version
The version can be confirmed on the PC screen at the start-
up of the TEST PROGRAM.
For the details, refer to 2. How to start the TEST PROGRAM.
1.3.2 Upgrading of version
For the details, refer to 7. Upgrading of version of the TEST
PROGRAM.
2. Inspections
2.1 Connection
INSPECTIONS
Version
V1.02 (jig NHB)
NHB32-C (for jigs)
MASTER CLOCK Tolerance
NETWORK 5n sec or less
WORD CLOCK IN 5n sec or less
AES/EBU 5n sec or less
AES/EBU
D-SUB 25P Female
Signal
Data In Ch Data Out Ch
Open GND
Pin
Hot
Cold
1-2
1
14
3-4
2
15
5-6
3
16
7-8
4
17
1-2
5
18
3-4
6
19
5-6
7
20
7-8
8
21
10, 12, 13, 22,
23, 24, 25
9, 11
25 14
13 1
SLOT 1
MY8-AE
DME32
5/18
6/19 7/20 8/21
1/14
2/15 3/16 4/17
CH 1-2 CH 3-4 CH 5-6 CH 7-8
5/16 6/19 7/20 8/21
CH 1-2
CH 3-4
CH 5-6
CH 7-8
2/3
XLR
IN
DSA-1
Digital Audio Analizer
AES/EBU 1
AES/EBU 2 AES/EBU 3
AES/EBU 4
1/14
2/15
3/16
4/17
5/16 6/19 7/20 8/21
1/14
2/15 3/16 4/17 5/16 6/19 7/20 8/21
1/14
2/15 3/16 4/17 5/16 6/19 7/20 8/21
NHB32-C
WORD CLOCK
OUT
WORD CLOCK
IN
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com