Periodic maintenance and adjustment
10-24
1
2
3
4
5
6
7
8
9
10
11
12
13
dicator light.
For example, if the identification
number is 123456:
Push and hold the knob.
The smart key system indicator
light will start to flash.
Release the knob after the smart
key system indicator light flashes
once.
The first digit of the identification
number has been set as “1”.
Push and hold the knob again.
Release the knob after the smart
key system indicator light flashes
twice.
The second digit has been set as
“2”.
Repeat the above procedure until
all digits of the identification num-
ber have been set. The smart key
system indicator light will flash for
10 seconds if the correct identifica-
tion number was entered.
TIP
When one of the following situations
applies, emergency mode will be termi-
nated and the smart key system indica-
tor light will flash quickly for 3 seconds.
In this case, start over again from step
2.
When there are no knob opera-
tions for 10 seconds during the
identification number input pro-
cess.
When the smart key system indi-
cator light is allowed to flash nine
or more times.
The identification number is not
entered correctly.
5. While the smart key system indica-
tor light is on, push the knob once
more to complete emergency
mode access. The smart key indi-
cator light will go off and then come
back on for approximately 4 sec-
onds.
6. While the smart key system indica-
tor light is on, turn the main switch
to “ON”. The vehicle can now be
operated normally.
BFM-F8199-E0.book 24 ページ ２０２２年２月４日 金曜日 午後４時１１分