background image

MX49 MX61 MX88 Reference Manual

Basic Structure

Using a Connected 
Computer

Using iOS 
Applications

Basic Structure

Controller Block

Tone Generator Block

Effect Block

Arpeggio Block

Song/Pattern 
Playing Block

Internal Memory

MIDI/Audio Signal Flow

Connecting to a computer

Creating a Song with a 
computer

Reference

Performance

Song/Pattern

File

Utility

Remote

17

Internal Memory

This instrument creates a variety of different kinds of data, including Performance and Voice. This section describes how 
to maintain the various types of data and use the memory devices/media for storing them.

Internal memory of the instrument

Preset memory

Preset Voices, Arpeggios, and Demo Song are stored in this memory. It is designed specifically for reading out data, 
and as such data cannot be written to it.

User memory

Stored to this memory are 128 Performances, User Voices, Utility settings (global system settings), and 50 Control 
templates. It is designed for both data writing and data reading operations. The contents of this memory are maintained 
even when the power is turned off.

Edit buffer

The edit buffer is the memory location for edited data of the Performance and the Voices assigned to the Parts. Only a 
single Performance can be held in this memory at one time. This memory is designed both for data writing and data 
reading operations. The contents of this memory are lost when the power is turned off. You should always store edited 
data to User memory before switching the Performance or turning off the power.

Recall buffer/ Compare buffer

The recall buffer is the backup memory for the edit buffer. If you’ve selected another Performance without storing the 
one you were editing, you can use the Recall function to recover your original edits, since the edit buffer’s contents are 
stored to backup memory. 
The compare buffer is designed specifically for saving data that exists prior to editing. The data prior to editing will 
temporarily be reinstated, then you can switch between the just-edited data and its original, unedited condition, allowing 
you to hear how your edits affect the sound (Compare function). These memories are designed both for data writing and 
data reading operations. The contents of this memory are lost when the power is turned off.

Internal memory

Recall buffer 

Compare buffer

(excluding Utility settings)

Preset memory

• Preset 

V

oice

• Arpeggio
• Demo Song

Edit Buffer

• Performance Edit

• 

V

oice Edit

• Utility

• Control templates
  (Remote mode)

Bulk Dump

User memory

• Performance

• User 

V

oice

• Utility settings

• Control templates
  (Remote mode)

St

or

e

Load/

 S

av

e (e

xecut

ed 

in 

F

ile di

spla

y)

Internal data communication

Data communication between this 
synthesizer and an external device

MIDI instrument or computer

DAW software
Remote Editor

USB flash memory

File extensions “.X5A”

(which include all data in User memory)

Bu

lk

 D

um

p

Содержание MX88








































































Отзывы: