MX49 MX61 MX88 Reference Manual
61
File display
All data in this synthesizer’s internal User Memory (Flash ROM) is treated as a single file (“All” file: extension is “.X5A”),
and can be saved to USB flash memory in this display.
Files in the USB flash memory can be loaded to internal memory.
NOTE
If the “All” file of the instrument is not in the root directory of the USB flash memory, a “File not found” error message appears on
the display and the Load display below is not shown.
1
File
Selects the file to be loaded. Only an “All” file of the instrument stored in the root directory of the USB flash memory can
be loaded. Press [ENTER] after selecting a file to call up the display for selecting the file type to be loaded.
2
Type
Determines which specific type of data will be loaded from a single file. Press [ENTER] after selecting the type. The
display which is called up differs depending on the selected type.
Settings:
File types which can be loaded are as follows.
Operation
Press [FILE]
Select desired display for editing with Cursor [
u
]/[
d
] buttons
Press [E
N
TER]
Edit parameters in selected display
Save
Parameter
Description
Name
(File name)
Determines the file name for saving to the USB flash memory. You can move the cursor to the desired location
by using the Cursor [
<
]/[
>
] buttons, and determine the character by using the [DATA] dial. The names can
contain up to eight alphabetic and numeric characters.
Load
Parameter
Description
All
An “All” file (extension is “.X5A”) saved to USB flash memory can be loaded and restored to the instrument.
All without Sys
(All without system)
All data, with the exception of the system settings in the Utility display, in an “All” file (extension is “.X5A”)
saved to USB flash memory, can be loaded.
FILE
*
Load
Type=
************
All
FILE
*
Load
*******
File=STAGE_01
2
1
[ENTER]
[EXIT]
