3
Caution: Read this before operating your unit
1
To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2
Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not
expose to rain and water.
3
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4
Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
5
Do not place records or other objects on top of the unit;
this will block the ventilation holes, cause the internal
temperature to rise and may result in a failure.
6
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7
Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8
To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
9
When not planning to use this unit for long periods of
time (ie., vacation, etc.), disconnect the AC power plug
from the wall outlet.
10
Be sure to read the “Troubleshooting” section on
common operating errors before concluding that your
unit is faulty.
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
We Want You Listening For A Lifetime
●
<
MX-1
>
: 200W + 200W (8
Ω
) RMS Output Power, 0.008% THD, 20–20,000 Hz
<
MX-2
>
: 150W + 150W (8
Ω
) RMS Output Power, 0.008% THD, 20–20,000 Hz
●
Increased Low Impedance Drive Capability
●
2-Pair Speaker Drive Capability
●
REMOTE CONTROL Connector to Make the Power of This Unit Controlled
by the Pre-Amplifier CX-1 or CX-2
●
Gold-Plated Input Terminals
FEATURES
