Yamaha MWS150-A, Руководство пользователя

Страница: 27 / 98

Instrument an d control functions
4-8
4
Outsi d e air temperature d isplay
“OUT TEMP”
This display shows the outside air tem-
perature from –10 °C to 40 °C in 1 °C
increments. The temperature dis-
played may vary from the actual out-
side air temperature.
TIP

If the outside air temperature falls
below –10 °C, a lower temperature
than –10 °C will not be displayed.

If the outside air temperature
climbs above 40 °C, a higher tem-
perature than 40 °C will not be dis-
played.

The accuracy of the temperature
reading may be affected when rid-
ing slowly (approximately under
20 km/h [12 mi/h]) or when
stopped at traffic signals, railroad
crossings, etc.
Multi-function d isplay
Under normal conditions, the multi-
function display can be set to display
the following.

odometer “ODO”

tripmeters “TRIP 1” or “TRIP 2”

oil change tripmeter “OIL TRIP”

V-belt replacement tripmeter
“BELT TRIP”
Push the “SELECT” button to switch
the display between the odometer ,
tripmeters 1 and 2, the oil change trip-
meter and the V-belt replacement trip-
meter in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
OIL TRIP
→
BELT TRIP
→
ODO
To reset tripmeter 1 or 2, select it by
pushing the “SELECT” button, and
then push the “RESET” button for one
second.
TIP

The odometer will lock at 999999.

Tripmeters 1 and 2 will reset and
continue counting after 9999.9 is
reached.
1. Outside air temperature display
1
1. Multi-function display
1
UBE2EYE0.book Page 8 Monday, July 17, 2017 2:03 PM