background image

Using the WPS button to make a wireless connection

Pressing the WPS button on your wireless LAN router is a simple way to configure a wireless connection.

Setup menu

“Network” > “Connection” > “Wireless (Wi-Fi)”

1

Select “WPS” with the cursor keys (

q

/

w

).

2

Follow instructions on the front display to make the wireless connection.

During the process, pressing the WPS button on your wireless LAN router is needed.

Once the connection is established, “Completed” is displayed and the Wireless LAN indicator
on the front panel lights up.

If “Not connected.” is displayed, either repeat the process from step 1 or try a different
connection method.

This completes the wireless connection process.

NOTE

This product cannot connect to a wireless LAN router (access point) using the WEP encryption method. In such case, try a different
connection method.

What is WPS?

WPS (Wi-Fi Protected Setup) is a standard developed by the Wi-Fi Alliance. WPS make it easy to set up a wireless network.

Related links

“Selecting the wireless method of connecting to the network” (p.132)

133

APPENDIX > Making wireless network connections

Содержание MusicCast R-N2000ASL























































































































































Отзывы: