Yamaha MU50, Руководство пользователя

Страница: 102 / 140

EFFECT EDIT MODE
93
NOTES
●
Even though the System routing applies the selected effect to all Parts, you can control how much the Reverb, Chorus and Variation effects are applied to any indi-
vidual Part (with the Reverb Send, Chorus Send
Reverb Send, Chorus Send
Reverb Send, Chorus Send Reverb Send, Chorus Send Reverb Send, Chorus Send and Variation Send
Variation Send
Variation Send Variation Send Variation Send parameters in the Single Part controls; see pages 38, 39). For the effects to be properly heard, the
Reverb Return, Chorus Return Reverb Return, Chorus Return Reverb Return, Chorus Return Reverb Return, Chorus Return Reverb Return, Chorus Return and Variation Return Variation Return Variation Return Variation Return Variation Return parameters in the All Parts controls must also be set to appropriate values (see pages 41, 42).
●
The stereo position of the effects is controlled by the Reverb Pan, Chorus Pan Reverb Pan, Chorus Pan Reverb Pan, Chorus Pan Reverb Pan, Chorus Pan Reverb Pan, Chorus Pan and Variation Pan Variation Pan Variation Pan Variation Pan Variation Pan parameters; see pages 87, 88, 91.
●
You can set Reverb, Chorus and Variation to be routed in parallel or in serial, and you can determine the amount of Variation effect that is sent to Chorus and Reverb,
as well as the amount of Chorus that is sent to Reverb. This is done with the Send Variation to Chorus
Send Variation to Chorus Send Variation to Chorus Send Variation to Chorus Send Variation to Chorus (page 91), Send Variation to Reverb Send Variation to Reverb Send Variation to Reverb Send Variation to Reverb Send Variation to Reverb (page 91), and Send Chorus Send Chorus Send Chorus Send Chorus Send Chorus
to Reverb to Reverb to Reverb to Reverb to Reverb (page 89) parameters. When these are all set to 0 0 0 0 0, all three effects are in parallel routing. Higher values for each provide varying degrees of serial routing.
When
V
ariation
is
set
to
System:
Variation
Return
Variation
Pan
Volume Expression
Volume Expression
Volume Expression
Rev Send
Cho Send
Var Send
Dry Level
Volume Expression
Pan
Part 1
REVERB
Reverb Return
Chorus Return
Send Chorus to Reverb
Send Variation to Chorus
Send Variation to Reverb
DRY LINE
PAN
PAN
PAN
Reverb Pan
Chorus Pan
OUTPUT
Thick line indicates stereo signal.
VARIATION CONNECTION = SYSTEM
CHORUS
VARIATION
SYSTEM EFFECT
Rev Send
Cho Send
Var Send
Dry Level
Pan
Part 2
Rev Send
Cho Send
Var Send
Dry Level
Pan
Part 3
Rev Send
Cho Send
Var Send
Dry Level
Pan
Part 16