Yamaha MU50, Дополнительное руководство

Страница: 18 / 46

MU50 MIDI Data Format
17
Data6 Data22 Data38
Data7 Data23 Data39
Data8 Data24 Data40
Data9 Data25 Data41
Data10 Data26 Data42
Data11 Data27 Data43
Data12 Data28 Data44
Data13 Data29 Data45
Data14 Data30 Data46
Data15 Data31 Data47
“ For Data32~Data47, only bit 6 and bit 5 are used.”
It is also possible for bitmap data to be received to change only for specified pixels. In this case, other pixels will display the previous status.
DISPLAY DATA parameter changes can be used to transmit consecutive data starting with a desired location.
<Table 1-6>
MIDI Parameter Change table ( MULTI PART ) [XG]
Address Size Data Prameter Description Default
(H) (H) (H) value(H)
08 nn 00 1 00 - 20 ELEMENT RESERVE 0 - 32 part10=0, other =2
nn 01 1 00 - 7F BANK SELECT MSB 0 - 127 part10=7F, other=0
nn 02 1 00 - 7F BANK SELECT LSB 0 - 127 00
nn 03 1 00 - 7F PROGRAM NUMBER 1 - 128 00
nn 04 1 00 - 1F, 7F Rcv CHANNEL A1 - A16, OFF Part No.
nn 05 1 00 - 01 MONO/POLY MODE 0:MONO 01
1:POLY
nn 06 1 00 - 02 SAME NOTE NUMBER 0:SINGLE 1 (all part)
KEY ON ASSIGN 1:MULTI Part 10=2, other=0
2:INST (for DRUM)
nn 07 1 00 - 05 PART MODE 0:NORMAL 00 (Other than Part 10)
1:DRUM 02 (Part10)
2 - 5:DRUMS1 - 4
nn 08 1 28 - 58 NOTE SHIFT -24 - +24[semitones] 40
nn 09 2 00 - FF DETUNE -12.8 - +12.7[Hz] 08 00
nn 0A 1st bit3-0
→
bit7-4 (80)
2nd bit3-0
→
bit3-0
nn 0B 1 00 - 7F VOLUME 0 - 127 64
nn 0C 1 00 - 7F VELOCITY SENSE DEPTH 0 - 127 40
nn 0D 1 00 - 7F VELOCITY SENSE OFFSET 0 - 127 40
nn 0E 1 00 - 7F PAN 0:random 40
1/L63...64/C...127/R63
nn 0F 1 00 - 7F NOTE LIMIT LOW C-2 - G8 00
nn 10 1 00 - 7F NOTE LIMIT HIGH C-2 - G8 7F
nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F
nn 12 1 00 - 7F CHORUS SEND 0 - 127 00
nn 13 1 00 - 7F REVERB SEND 0 - 127 28
nn 14 1 00 - 7F VARIATION SEND 0 - 127 00
nn 15 1 00 - 7F VIBRATO RATE -64 - +63 40
nn 16 1 00 - 7F VIBRATO DEPTH -64 - +63 40 (drum part ignores)
nn 17 1 00 - 7F VIBRATO DELAY -64 - +63 40 (drum part ignores)
nn 18 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
nn 19 1 00 - 7F FILTER RESONANCE -64 - +63 40
nn 1A 1 00 - 7F EG ATTACK TIME -64 - +63 40
nn 1B 1 00 - 7F EG DECAY TIME -64 - +63 40
nn 1C 1 00 - 7F EG RELEASE TIME -64 - +63 40
nn 1D 1 28 - 58 MW PITCH CONTROL -24 - +24[semitones] 40
nn 1E 1 00 - 7F MW FILTER CONTROL -9600 - +9450[cent] 40
nn 1F 1 00 - 7F MW AMPLITUDE CONTROL -64 - +63 40
nn 20 1 00 - 7F MW LFO PMOD DEPTH 0 - 127 0A
nn 21 1 00 - 7F MW LFO FMOD DEPTH 0 - 127 00
nn 22 1 00 - 7F MW LFO AMOD DEPTH 0 - 127 00
nn 23 1 28 - 58 BEND PITCH CONTROL -24 - +24[semitones] 42
nn 24 1 00 - 7F BEND FILTER CONTROL -9600 - +9450[cent] 40
nn 25 1 00 - 7F BEND AMPLITUDE CONTROL -64 - +63 40
nn 26 1 00 - 7F BEND LFO PMOD DEPTH 0 - 127 40
nn 27 1 00 - 7F BEND LFO FMOD DEPTH 0 - 127 40
nn 28 1 00 - 7F BEND LFO AMOD DEPTH 0 - 127 40
TOTAL SIZE 29
nn 30 1 00 - 01 Rcv PITCH BEND OFF/ON 01
nn 31 1 00 - 01 Rcv CH AFTER TOUCH(CAT) OFF/ON 01
nn 32 1 00 - 01 Rcv PROGRAM CHANGE OFF/ON 01
nn 33 1 00 - 01 Rcv CONTROL CHANGE OFF/ON 01
nn 34 1 00 - 01 Rcv POLY AFTER TOUCH(PAT) OFF/ON 01
nn 35 1 00 - 01 Rcv NOTE MESSAGE OFF/ON 01
nn 36 1 00 - 01 Rcv RPN OFF/ON 01
nn 37 1 00 - 01 Rcv NRPN OFF/ON XG=01, GM=00
nn 38 1 00 - 01 Rcv MODURATION OFF/ON 01
nn 39 1 00 - 01 Rcv VOLUME OFF/ON 01
nn 3A 1 00 - 01 Rcv PAN OFF/ON 01
nn 3B 1 00 - 01 Rcv EXPRESSION OFF/ON 01
nn 3C 1 00 - 01 Rcv HOLD1 OFF/ON 01
nn 3D 1 00 - 01 Rcv PORTAMENTO OFF/ON 01
nn 3E 1 00 - 01 Rcv SOSTENUTO OFF/ON 01
nn 3F 1 00 - 01 Rcv SOFT PEDAL OFF/ON 01
nn 40 1 00 - 01 Rcv BANK SELECT OFF/ON XG=01, GM=00