manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя

Yamaha MU100R - инновационный синтезатор, который обеспечивает высочайшее качество звука и беспрецедентную гибкость в настройках. Для получения подробной информации о возможностях этого устройства, загрузите бесплатный Owner'S Manual с официального сайта manualshive.com. Наслаждайтесь музыкальным творчеством без ограничений!

Поделиться
Скачать
background image

Multi Mode

123

Growl Control Depth (GrlCtrlDpt)

Settings:

-64 — +63

Sets the amount of variation produced by
the controller assigned to growl. The higher
the value, the greater the variation. Positive
values cause an increase in growl effect in
response to higher controller values (e.g.,
increased breath pressure or higher modu-
lation wheel position), while negative val-
ues cause a decrease in growl effect in re-
sponse to higher controller values.

Throat Formant

Throat Formant Control Change Num-
ber (Thr CC No.)

Settings:

off, 01 — 31, off, 33 — 95,
AT, VEL, PB

“Throat Formant” controls the characteris-
tics of the simulated player’s  lungs, trachea,
and oral cavity and Can add a realistic
“roughness” to the sound. The “Thr CC No.”
parameter specifies the controller to be used
for throat formant control. When set to “off”,
no throat formant variation can be produced
via a controller, but a continuous throat
formant value is determined by the
“ThrCtrlDpt” parameter, below (negative
values increase the throat formant level).

Details
•The “ThrCtrlDpt” parameter (below) must
be set to an appropriate value (higher than
“+01” or lower than “-01”) for throat formant
control to have any effect.
• Throat Formant only applies to some reed-
type Voices.

Throat Formant Control Depth (ThrCtrlDpt)

Settings:

-64 — +63

Sets the amount of variation produced by the
controller assigned to throat formant. The
higher the value, the greater the variation. Posi-
tive values cause an increase in throat formant
effect in response to higher controller values
(e.g., increased breath pressure or higher
modulation wheel position), while negative
values cause a decrease in throat formant ef-
fect in response to higher controller values.

Harmonic Enhancer

Harmonic Enhancer Control Change
Number (Hrm CC No.)

Settings:

off, 01 — 31, off, 33 — 95,
AT, VEL, PB

The Harmonic Enhancer can vary the har-
monic structure of the sound over a wide range.
The “Hrm CC No.” parameter specifies the
controller to be used for harmonic enhancer
depth (wet/dry balance) control. When set to
“off,” no harmonic enhancer depth variation
can be applied via a controller.

Details
• The “HrmCtrlDpt” parameter (below) must

be set to an appropriate value (higher than
“+01” or lower than “-01”) for harmonic
enhancer control to have any effect.

• Since most VL Voices have sufficient natu-

ral harmonic content, the Harmonic En-
hancer is actually only used on a few
Voices. Therefore changing the controller
destination with many Voices will produce
either no change in the sound or a simple
change in amplitude.

Multi Edit Mode

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MU100R

Panasonic HF Series Quick Start Manual preview
HF Series
Бренд: Panasonic Страницы: 9
Canta V5 Quick Manual preview
V5
Бренд: Canta Страницы: 2
MacDon R216 Quick Card preview
R216
Бренд: MacDon Страницы: 2
MacDon R216 Operator'S Manual preview
R216
Бренд: MacDon Страницы: 214
MacDon R216 Installation Instructions Manual preview
R216
Бренд: MacDon Страницы: 32
Landoll 2130 Operator'S Manual preview
2130
Бренд: Landoll Страницы: 83
CAIRE FreeStyle Comfort Technical Manual preview
FreeStyle Comfort
Бренд: CAIRE Страницы: 33
Eagle Eye SG-1000 User Manual preview
SG-1000
Бренд: Eagle Eye Страницы: 21
Labomed Magna User Manual preview
Magna
Бренд: Labomed Страницы: 67
MacDon FlexDraper FD2 Series Quick Start Manual preview
FlexDraper FD2 Series
Бренд: MacDon Страницы: 2
M-Audio OXYGEN PRO MINI Quick Start Manual preview
OXYGEN PRO MINI
Бренд: M-Audio Страницы: 56
Pari eFlow rapid User Manual preview
eFlow rapid
Бренд: Pari Страницы: 11
Pari O-PEP System Instructions For Use preview
O-PEP System
Бренд: Pari Страницы: 2
Haas DT-1 Removal And Replacement Procedures preview
DT-1
Бренд: Haas Страницы: 5
Parkside PFMR 1400 A1 Original Operating Instructions preview
PFMR 1400 A1
Бренд: Parkside Страницы: 58
PAS Systems International PAS V Instruction Manual preview
PAS V
Бренд: PAS Systems International Страницы: 24
PAS Systems International MARK V Alcovisor Operating Manual preview
MARK V Alcovisor
Бренд: PAS Systems International Страницы: 20
York Fitness K850 Instruction Manual preview
K850
Бренд: York Fitness Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды