MU100
7
DISASSEMBLY PROCEDURE
1-1
Remove the four (4) screws marked [60], the screw
marked [75], the screw marked [76] and the two (2)
screws marked [80]. The bottom assembly can then
be removed. (Fig. 1)
*
When you reattach the bottom assembly, you should
tighten the screws in the order described in figure 1.
1.
Bottom Assembly
Front assembly
Rear panel
[80]
[76]
[60]
[75]
[60]
[60]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[75]: Bind Head Screw 3.0X6 MFZN2BL (EG330360)
[76]: Bind Head Screw 3.0X6 MFNI33 (EG330370)
[80]: Flat Head Tapping Screw-C 3.0X8 MFZN2BL (VR060800)
(Fig.1)
Bottom assembly
7
8
6
4
1
3
2
5
2-1
Remove the bottom assembly. (See Procedure 1.)
2-2
Remove the two (2) screws marked [30]. The top
assembly can then be removed from the front
assembly. (Fig. 2)
2.
DM Circuit Board
Front assembly
[30]
[30]: Flat Head Tapping Screw-C 3.0X8 MFZN2BL (VR060800)
(Fig.2)
Top assembly
