FEATURES
1-4
Multi-function display
The multi-function display can show:
• an odometer
• two tripmeters
• a fuel reserve tripmeter
• an instantaneous fuel consumption display
• an average fuel consumption display
• a coolant temperature display
• an air temperature display
• a brightness control mode
The odometer shows the total distance the vehi-
cle has traveled. The standard tripmeters show
the distance traveled since they were last reset.
The fuel reserve tripmeter shows the distance
traveled since the last segment of the fuel meter
began flashing.
TIP
• The odometer will lock at 999999 and cannot
be reset.
• The tripmeter will reset to 0 and continue
counting after 9999.9 is reached.
Push the “TRIP” switch briefly to switch the dis-
play in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
→
km/L or
L/100 km or MPG
→
AVE_ _._ km/L or AVE_ _._
L/100 km or AVE_ _._ MPG
→
_ _ °C
→
Air_ _
°C
→
ODO
TIP
• Push “INFO” switch briefly to switch the display
in the reverse order.
• The display changes to fuel reserve tripmeter
“TRIP F” when the last segment of the fuel me-
ter starts flashing.
• To reset a tripmeter, select it by pushing the
“TRIP” switch or the “INFO” switch, and while
the digits are flashing, push the “INFO” switch
until it is reset.
• If you do not reset the fuel reserve tripmeter
manually, it will reset automatically and disap-
pear from the display after refueling and travel-
ing 5 km (3 mi).
Fuel reserve tripmeter
When the fuel level becomes low, the last seg-
ment of the fuel meter will start flashing. The fuel
reserve tripmeter “TRIP F” will automatically ap-
pear and start counting the distance traveled
from that point. In this case, push the “TRIP”
switch to switch the display in the following or-
der:
TRIP F
→
km/L or L/100 km
→
AVE_ _._ km/L
or AVE_ _._ L/100 km
→
_ _ °C
→
Air_ _ °C
→
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
For the UK:
TRIP F
→
MPG
→
AVE_ _._ MPG
→
_ _ °C
→
Air_ _ °C
→
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
TIP
• Push the “INFO” switch to change the display
in the reverse order.
• You can manually reset the fuel reserve trip-
meter, or after refueling and traveling 5 km (3
mi) it will reset automatically and disappear
from the display.
Instantaneous fuel consumption
This function calculates the fuel consumption
under current riding conditions.
The instantaneous fuel consumption display can
be set to either “km/L”, “L/100 km” when using ki-
lometers.
To switch the fuel consumption units, push the
top set button until the measurement units
change. When using miles, the fuel consump-
tion unit is “MPG”.
1. Multi-function display
1
1. Instantaneous fuel consumption display
1
Содержание MTT690 2020
Страница 1: ...2020 SERVICE MANUAL TRACER 700 MTT690 MTT690 U B4T F8197 E0 ...
Страница 2: ......
Страница 6: ......
Страница 8: ......