Yamaha MTN690-A 2019 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 98

background image

Instrument and control functions

3-1

3

EAU10978

Immobilizer system

This vehicle is equipped with an immo-
bilizer system to help prevent theft by
re-registering codes in the standard
keys. This system consists of the fol-
lowing:

t

a code re-registering key (with a
red bow)

t

two standard keys (with a black
bow) that can be re-registered
with new codes

t

a transponder (which is installed in
the code re-registering key)

t

an immobilizer unit

t

an ECU

t

an immobilizer system indicator
light (See page 3-5.)

The key with the red bow is used to
register codes in each standard key.
Since re-registering is a difficult pro-
cess, take the vehicle along with all
three keys to a Yamaha dealer to have
them re-registered. Do not use the key
with the red bow for driving. It should
only be used for re-registering the
standard keys. Always use a standard
key for driving.

NOTICE

ECA11822

t

DO NOT LOSE THE CODE RE-
REGISTERING KEY! CONTACT
YOUR DEALER IMMEDIATELY
IF IT IS LOST! If the code re-reg-
istering key is lost, registering
new codes in the standard keys
is impossible. The standard
keys can still be used to start
the vehicle, however if code re-
registering is required (i.e., if a
new standard key is made or all
keys are lost) the entire immobi-
lizer system must be replaced.
Therefore, it is highly recom-

mended to use either standard
key and keep the code re-regis-
tering key in a safe place.

t

Do not submerse any key in wa-
ter.

t

Do not expose any key to exces-
sively high temperatures.

t

Do not place any key close to
magnets (this includes, but not
limited to, products such as
speakers, etc.).

t

Do not place items that transmit
electrical signals close to any
key.

t

Do not place heavy items on any
key.

t

Do not grind any key or alter its
shape.

t

Do not disassemble the plastic
part of any key.

t

Do not put two keys of any im-
mobilizer system on the same
key ring.

t

Keep the standard keys as well
as keys of other immobilizer
systems away from this vehi-
cle’s code re-registering key.

1. Code re-registering key (red bow)

2. Standard keys (black bow)

«
...
14
15
16
17
18
...
»

Содержание MTN690-A 2019



































































































Отзывы:

Нет отзывов

Похожие инструкции для MTN690-A 2019

Бренд: Triumph Страницы: 410

Бренд: KYMCO Страницы: 55

Бренд: R&G Страницы: 21

Бренд: Honda Страницы: 41

Бренд: KTM Power Parts Страницы: 7

Superbike 749R 2006

Бренд: Ducati Страницы: 608

Бренд: Hudora Страницы: 8

Бренд: BMW Страницы: 205

Бренд: MZ Страницы: 82

Road Sofa H18-07-18X all

Бренд: Saddlemen Страницы: 2

Бренд: JAWA Страницы: 40

Бренд: R&G Страницы: 19

Бренд: Rockford Fosgate Страницы: 8

Бренд: Rockford Fosgate Страницы: 17

Drystash Series

Бренд: Oxford Страницы: 20

Heritage Series

Бренд: Oxford Страницы: 28

FBG-P-RAN-09-XP

Бренд: SuperATV Страницы: 4

Бренд: KTM Страницы: 177

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды