Yamaha MT10M 2020, Руководство пользователя

Страница: 36 / 120

Instrument and control functions
5-13
1
2
3
4
5
6
7
8
9
10
11
12
Display brightness and shift indica-
tor light control mode
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.

Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer.

shift indicator light activity function:
This function allows you to set the
indicator light to on, flash, or off.

shift indicator light activation:
This function allows you to select
the engine speed at which the indi-
cator light will be activated.

shift indicator light deactivation:
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.

shift indicator light brightness:
This function allows you to adjust
the brightness of the shift indicator
light.
TIP
The brightness level display shows the
brightness level setting.
To adjust the brightness of the displays
and tachometer
1. Turn the key to “OFF”.
2. Push and hold the “CLOCK” but-
ton.
3. Turn the key to “ON”, and then re-
lease the “CLOCK” button after
five seconds.
4. Push the “RESET” button to select
the desired brightness level.
5. Push the “CLOCK” button to con-
firm the selected brightness level.
The control mode changes to the
shift indicator light activity function.
To set the shift indicator light activity
function
1. Push the “RESET” button to select
one of the following indicator light
activity settings:

On - the indicator light will come
on when activated. (This setting
is selected when the indicator
light stays on.)

Flash - the indicator light will
flash when activated. (This set-
ting is selected when the indica-
tor light flashes four times per
second.)

Off - the indicator light is deacti-
vated; in other words, it will not
come on or flash. (This setting
is selected when the indicator
light flashes once every two
seconds.)
2. Push the “CLOCK” button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift indicator light activation
function.
1. Brightness level display
1
BFT-9-10.book 13 ページ ２０２０年７月２８日 火曜日 午後４時１７分