Yamaha MT09 2020, Руководство пользователя

Страница: 49 / 112

7-1
1
2
3
4
5
6
7
8
9
10
11
12
Operation and important riding points
EAU15952
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10272
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
EAUM3632
TIP
This model is equipped with:

a lean angle sensor. This sensor
stops the engine in case of a vehi-
cle turnover. If this happens, the
engine trouble warning light will
come on, but this is not a malfunc-
tion. Turn the vehicle power off
and then back on again to cancel
the warning light. Failing to do so
will prevent the engine from start-
ing even though the engine will
crank when pushing the start
switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start switch
to restart the engine.
EAU78153
Starting the engine
Under normal conditions, shift the
transmission into neutral before start-
ing the engine. To start the engine with
the transmission in gear, the sidestand
must be up and the clutch lever pulled.
To start the engine
1. Set the Stop/Run/Start switch to
“ ”.
2. Turn the main switch to “ON”.
3. Confirm the following lights per-
form a circuit check.

Engine trouble warning light

Oil level warning light

Coolant temperature warning
light

Traction control system light

ABS warning light
TIP

The ABS warning light will go off
after reaching a speed of 10 km/h
(6 mi/h) or higher.

For QS-enabled vehicles, the
quick shift indicator light will also
come on.
4. Confirm the transmission is in neu-
BS2-9-13.book 1 ページ ２０１９年７月２５日 木曜日 午前１１時１分