Yamaha MT03M, Руководство пользователя

Страница: 21 / 106

Instrument an d control functions
4-5
4
“F” (full) towards “E” (empty) as the fuel
level decreases. When approximately
3.0 L (0.79 US gal, 0.66 Imp.gal) of fuel
remains, the last segment starts flash-
ing. Refuel as soon as possible.
TIP
If a problem is detected in the electrical
circuit, the fuel level segments will flash
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
EAU87290
Clock
The clock uses a 12-hour time system.
To set the clock
1. Push both the “SELECT” button
and “RESET” button until the hour
digits start flashing.
2. Use the “RESET” button to set the
hours.
3. Push the “SELECT” button and
the minute digits start flashing.
4. Use the “RESET” button to set the
minutes.
5. Push the “SELECT” button to con-
firm the settings.
EAU87350
Coolant temperature meter
This meter shows the temperature of
the coolant, and thereby the condition
of the engine. The segments come on
from “C” (cold) to “H” (hot) as the en-
gine temperature increases. If the hot
segment flashes, stop the engine as
soon as possible, and let the engine
cool. (See page 7-37.)
EAU87400
Transmission g ear d isplay
This display shows the selected gear.
The neutral position is indicated by
“
” and by the neutral indicator light.
1. Clock
MPH
MPG mile
1
1. Coolant temperature meter
1. Neutral indicator light “ ”
2. Transmission gear display
MPH
MPG mile
1
MPH
MPG mile
1 2
UB5W10E0.book Page 5 Friday, March 27, 2020 12:34 PM