Yamaha MT-10 2023, Руководство пользователя

Страница: 59 / 134

Instrument and control functions
5-31
1
2
3
4
5
6
7
8
9
10
11
12
13
EAU13435
Catalytic converter
The exhaust system contains catalytic
converter(s) to reduce harmful exhaust
emissions.
WARNING
EWA10863
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:

Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.

Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.

Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.

Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU94110
Seat
To remove the seat
1. Open the seat lock cover, insert
the key into the seat lock, and then
turn the key counterclockwise.
2. While holding the key in that posi-
tion, slide the seat backward and
then lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projections into the seat
holders as shown.
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
NOTICE
ECA27380
The IMU is located under the seat. It
is not user serviceable and very sen-
sitive, so we advise against handling
the IMU directly.

Do not remove, modify, or place
any foreign materials in or
around the IMU.
1. Seat lock cover
2. Seat lock
3. Unlock.
2 2 2
3 3
1 1
1. Projection
2. Seat holder
2 2 2
2
1
B5Y-28199-11-E0.book 31 ページ ２０２２年９月６日 火曜日 午前１０時２８分