Yamaha MT 10 2016, Руководство по обслуживанию

Страница: 600 / 658

STEERING DAMPER SYSTEM
8-183
EAS32037
SELF-DIAGNOSTIC FUNCTION
The this vehicle is equipped with a self-diagnostic function in order to ensure that the steering damper
system is operating normally. If this function detects a malfunction in the system, illuminates the steer-
ing damper warning light to alert the rider that a malfunction has occurred in the system. Once a mal-
function has been detected, a fault code number is stored in the memory of the ECU.
Checking the steering damper warning light
The steering damper warning light comes on for around 2 seconds after the main switch has been set
to “ON”. If the warning light does not come on, the warning light (LED) may be defective.
ECU detects an abnormal signal from the steering damper
If the ECU detects an abnormal signal from the steering damper, the ECU illuminates the steering
damper warning light.
EAS32038
TROUBLESHOOTING METHOD
The steering damper warning light comes on.
1. Check:
• Fault code number
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Check the fault code number that have a condition of “Detected” using the Yamaha diagnostic tool.
b. Identify the faulty system with the fault code number.
c. Identify the probable cause of the malfunction.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Check and repair the probable cause of the malfunction.
Refer to “TROUBLESHOOTING DETAILS (STEERING DAMPER) (FAULT CODE)” on page 8-183
and “SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE” on page 9-5.
3. Perform the reinstatement action for the fuel injection system.
Refer to “Confirmation of service completion” in the appropriate table in “TROUBLESHOOTING DE-
TAILS (STEERING DAMPER) (FAULT CODE)” on page 8-183.
TIP
Turning the main switch to “OFF” will not erase the malfunction history.
EAS30958
BASIC INSTRUCTIONS FOR DIAGNOSTIC FUNCTION
Use the Yamaha diagnostic tool and determine the location of the malfunction and the cause from the
recorded fault code. Refer to “YAMAHA DIAGNOSTIC TOOL” on page 8-36.
EAS32039
TROUBLESHOOTING DETAILS (STEERING DAMPER) (FAULT CODE)
This section describes the measures for the fault code number displayed on the Yamaha diagnostic
tool. Check and service the items or components that are the probable cause of the malfunction follow-
ing the order given.
After the check and service of the malfunctioning part have been completed, delete the fault codes dis-
played on the Yamaha diagnostic tool according to the reinstatement method.
Fault code No.:
Fault code number displayed on the Yamaha diagnostic tool when the engine failed to work normally.
Diagnostic code No.:
Diagnostic code number to be used when the diagnostic mode is operated. Refer to “SELF-DIAGNOS-
TIC FUNCTION AND DIAGNOSTIC CODE TABLE” on page 9-5.