Yamaha MT 10 2016, Руководство по обслуживанию

Страница: 27 / 658

FEATURES
1-18
Instantaneous fuel consumption mode
The instantaneous fuel consumption display can
be set to either “km/L”, “L/100 km” or “MPG” (for
the UK).
•
“km/L”: The distance that can be traveled on
1.0 L of fuel under the current riding conditions
is shown.
• “L/100 km”: The amount of fuel necessary to
travel 100 km under the current riding condi-
tions is shown.
•
“MPG” (for the UK): The distance that can be
traveled on 1.0 Imp.gal of fuel under the cur-
rent riding conditions is shown.
To switch between the instantaneous fuel con-
sumption display settings, push the “CLOCK”
and “RESET” button together.
TIP
If traveling at speeds under 20 km/h (12 mi/h), “–
–.–” is displayed.
Average fuel consumption mode
This display shows the average fuel consump-
tion since it was last reset.
The average fuel consumption display can be
set to either “AVE – –.– km/L”, “AVE – –.– L/100
km” or “AVE – –.– MPG” (for the UK).
•
“AVE – –.– km/L”: The average distance that
can be traveled on 1.0 L of fuel is shown.
•
“AVE – –.– L/100 km”: The average amount of
fuel necessary to travel 100 km is shown.
•
“AVE – –.– MPG” (for the UK): The average
distance that can be traveled on 1.0 Imp.gal of
fuel is shown.
To switch between the average fuel consump-
tion display settings, push the “CLOCK” and
“RESET” button together.
To reset the average fuel consumption, push the
“RESET” button for two seconds.
TIP
After resetting the average fuel consumption, “–
–.–” will be shown until the vehicle has traveled
1 km (0.6 mi).
Display brightness and shift timing indica-
tor light control mode
This mode cycles through five control functions,
allowing you to make the following settings in the
order listed below.
•
Display brightness:
This function allows you to adjust the bright-
ness of the displays and tachometer.
• Shift timing indicator light activity function:
This function allows you to set the indicator
light to on, flash, or off.
•
Shift timing indicator light activation:
This function allows you to select the engine
speed at which the indicator light will be acti-
vated.
•
Shift timing indicator light deactivation:
This function allows you to select the engine
speed at which the indicator light will be deac-
tivated.
•
Shift timing indicator light brightness:
This function allows you to adjust the bright-
ness of the shift timing indicator light.
TIP
The brightness level display shows the bright-
ness level setting.
1. Instantaneous fuel consumption display
1. Average fuel consumption display
1
1
1. Brightness level display
1