Instrument an
d
control functions
5-9
5
If the vehicle coolant temperature
is above 124 °C (255 °F) the cool-
ant temperature display will read
“Hi”
To reset information display items
1. Rotate the wheel switch to select
one of the two vehicle information
displays.
2. Press the wheel switch inward to
highlight the information display.
3. Rotate the wheel switch to select
the desired information display
item.
4. Press and hold the wheel switch
inward until the highlighted dis-
play item is reset.
Transmission
g
ear
d
isplay
This shows which gear the transmis-
sion is in. This model has 6 gears and a
neutral position. The neutral position is
indicated by the neutral indicator
light “
” and by the transmission gear
display “
”.
MODE
d
isplay
This display shows the currently se-
lected “D-MODE” and “TCS-MODE”
settings. The mode that is enlarged
and displayed on the right can be ad-
justed using the MODE up/down
switches. Use the “MODE” switch to
toggle left-right between “TCS-MODE”
and “D-MODE”.
See page 4-1 for information on “D-
MODE” and “TCS-MODE” settings.
TIP
When the engine trouble warning
light “
”, the auxiliary system
warning “
”, or the coolant tem-
perature warning “
” are on, “D-
MODE” and “TCS-MODE” cannot
be adjusted.
The previously selected modes
will be displayed when the vehicle
power is turned on.
To turn off the traction control system,
select “TCS-MODE” with the “MODE”
switch, then push and hold the MODE
up switch until “OFF” is displayed. To
turn the traction control system back
on, press the MODE down switch
(“TCS-MODE” will return to its previ-
ous setting).
TIP
When “TCS-MODE” has been set
to “OFF”, the traction control sys-
tem, SCS and LIF systems are all
turned off together.
The “TCS-MODE OFF” and “TCS-
MODE M” settings can only be se-
lected while the vehicle is
stopped.
Clock
The clock uses a 12-hour time system.
See page 5-16 to set the clock.
Quick shifter in
d
icator “QS”
When able to shift, the respective QS
or
turns green.
UB7N12E0.book Page 9 Tuesday, August 23, 2022 10:08 AM