Yamaha MT-09 2023, Руководство пользователя

Страница: 28 / 118

Instrument an d control functions
5-6
5
NOTICE
ECA27222
When turnin g the main switch on,
avoi d any movement or vi b ration of
the vehicle as it may interfere with
the initialization of the IMU. If this
occurs, the traction control system
will not operate an
d the “TCS-
MODE” d isplay will rea d “OFF” until
the IMU can initialize.
EAU88362
Oil pressure an d Coolant tempera-
ture warnin g li g ht “ ”
This warning light comes on if the en-
gine oil pressure is low or if the coolant
temperature is high. If this occurs, stop
the engine immediately.
TIP

When the vehicle is first turned on,
this light should come on until the
engine is started.

If a malfunction is detected, this
light will come on and the oil pres-
sure icon will flash.
NOTICE
ECA22441
If the oil pressure an d coolant warn-
in g li g ht d oes not g o off after start-
in g the en g ine or if it comes on while
the en g ine is runnin g , stop the vehi-
cle an d en g ine imme d iately.

If the en g ine is overheatin g , the
coolant temperature warnin g
icon will come on. Let the en-
g ine cool. Check the coolant
level (see pa g e 8-35).

If the en g ine oil pressure is low,
the oil pressure warnin g icon
will come on. Check the oil level
(see pa
g e 8-10).

If the warnin g li g ht remains on
after lettin g the en g ine cool an d
confirmin g the proper oil level,
have a Yamaha d ealer check
the vehicle. Do not continue to
operate the vehicle!
EAU88370
Auxiliary system warnin g li g ht “ ”
This warning light comes on if a prob-
lem is detected in a non-engine-related
system.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. Otherwise, have a Yamaha
dealer check the vehicle.
UB7N12E0.book Page 6 Tuesday, August 23, 2022 10:08 AM