8
MS300
DISASSEMBLY PROCEDURE
Fig.1
1.
Amplifier assembly (Time required: 5 min.)
1-1.
Remove the sixteen (16) screws marked [160A]. The
amplifier assembly can then be removed. (Fig. 1)
2.
Cabinet assembly and buffle assembly
(Time required: 10 min.)
2-1.
Remove the sixteen (16) screws marked [150]. The
buffle assembly can then be removed from the
capinet assembly. (Fig. 1)
3.
Speakers (30cm) (Time required: 15 min.),
Horn driver (Time required: 12 min.) and
Diaphragm assembly (Time required: 11 min.)
3-1.
Remove the buffle assembly from the cabinet
assembly. (See Procedure 2.)
3-2-1. To remove the 30cm speaker, remove the four (4)
screws marked [160B] and the front grille. (Fig. 1)
3-2-2. Remove the eight (8) bolts marked [70]. The 30cm
speaker can then be removed. (Fig. 1)
3-3-1. To remove the horn driver, remove the four (4) screws
marked [110]. Then remove the speaker with the
bracket. (Fig. 1)
3-3-2. Remove the two (2) screws marked [100]. The horn
driver can then be removed from the bracket. (Fig. 1)
3-4.
Remove the three (3) screws marked [80b]. The
diaphrage assembly can then be removed. (Fig. 1)
[70]: Hexagonal Bolt 5.0 X 35 MFZN2BL (V6389200)
[100]: Bind Head Screw 1/4” -2ouncx 3/8” (V6289600)
[110]: Bind Head Tapping Screw-P 5.0 X 30 MFZN2BL (V6405200)
[150]: Bind Head Tapping Screw-P 5.0 X 50 MFZN2BL (V6084800)
[160]: Bind Head Screw-Giza 4 X 16 MFZN2BL (V6396400)
[160A]
[160A]
[160A]
[150]
[150]
[150]
[160A]
30cm Speaker
[100]
[110]
[110]
[80b]
Red
Black
Horn Driver
Red marking
Red marking
Yellow Blue
[110]
[150]
[150]
[150]
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
