manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

Basic Structure

MOTIF XS Owner’s Manual

56

Basic Structure

Basic Operation

Connections

Basic Section

Tone Generator Block

The tone generator block is what actually produces sound in response to the MIDI messages received from the Sequencer 
block, the Controller block, the Arpeggio block and from the external MIDI instrument via the MIDI IN connector or the USB 
connector. The structure of the tone generator block differs depending on the mode. 

Tone Generator block in the Voice 
Mode

In this mode, the tone generator block receives MIDI data 
over a single channel. This status is referred to as a “single 
timbre” tone generator. A Voice is played from the 
keyboard, using a single part. 
Keep in mind that song data on an external sequencer 
consisting of multiple MIDI channels will not play back 
properly in this mode. If you are using an external MIDI 
sequencer or computer to play the instrument, make sure 
to use the Song mode or Pattern mode.

A program that contains the sonic elements for generating 
a specific musical instrument sound is referred to as a 
“Voice.” Internally, there are two Voice Types: Normal 
Voices and Drum Voices. Normal Voices are mainly pitched 
musical instrument type sounds that can be played over 
the range of the keyboard. Drum Voices are mainly 
percussion/drum sounds that are assigned to individual 
notes on the keyboard. 

n

For instructions on editing a Normal Voice, see page 96. For 
instructions on editing a Drum Voice, see page 127. 

Normal Voice

This is a Voice which is played conventionally from the 
keyboard, with standard pitches sounding for each key. A 
Normal Voice consists of up to eight Elements. Depending 
on the settings in the Voice Edit mode, these Elements are 
sounded simultaneously, or the different Elements are 
sounded according to the note range, velocity range and 
the XA (Expanded Articulation) settings. 
The illustration below is an example of a Normal Voice. 
Since the six Elements here are distributed across both the 
note range of the keyboard and the velocity range, a 
different Element sounds depending on which note you 
play and how strongly you play it. In the note distribution, 
Elements 1 and 2 sound in the lower range of the 
keyboard, Elements 3 and 4 sound in the middle range, 
and Elements 5 and 6 sound in the higher range. In the 
velocity distribution, Elements 1, 3 and 5 sound when 

playing the keyboard softly, while Elements 2, 4 and 6 
sound when playing it strongly. In a practical example of 
this in use, a piano Voice could be composed of six 
different samples. Elements 1, 3 and 5 would be the 
sounds of the piano played softly, over the respective note 
ranges, while Elements 2, 4 and 6 would be strongly 
played sounds, for each respective note range. Actually, 
the MOTIF XS is even more flexible than this, since it allows 
up to eight independent Elements. 

Drum Voice

Drum Voices are mainly percussion/drum sounds that are 
assigned to individual notes on the keyboard. A collection 
of assigned percussion/drum waves or Normal Voices is 
known as a Drum Kit.

Expanded Articulation (XA) is a specially designed tone 
generation system of the MOTIF XS that provides greater 
performance flexibility and acoustic realism. It allows you 
to more effectively recreate realistic sound and natural 
performance techniques—such as legato and staccato—
and provides other unique modes for random and alternate 
sound changes as you play. 

Realistic legato performance 

Conventional synthesizers recreate a legato effect by 
continuing the volume envelope of a previous note on to 
the next one, in the mono mode. However, this results in an 
unnatural sound different from that of an actual acoustic 
instrument. The MOTIF XS more accurately reproduces a 
legato effect by allowing specific Elements to be sounded 
when playing legato and other Elements to be played 

Part structure in the Voice mode

Voice

Normal Voices & Drum Voices

Expanded Articulation (XA)

Velocity

Element 1

Element 2

Element 3

Element 4

Element 5

Element 6

Key 1

Key 5 Key 10 Key 18 Key 21

Key 73

C0

C1

C6

Individual 

drum sounds 

(different for 

each key)

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Razer Huntsman Elite Common Questions preview
Huntsman Elite
Бренд: Razer Страницы: 3
FAME DPP-61 User Manual preview
DPP-61
Бренд: FAME Страницы: 16
Ploom TECH+ P+1 User Manual preview
P+1
Бренд: Ploom TECH+ Страницы: 48
Modecom MC-TPK1 User Manual preview
MC-TPK1
Бренд: Modecom Страницы: 88
A4Tech GK-300 User Manual preview
GK-300
Бренд: A4Tech Страницы: 4
Naxa NSW-11 Instruction Manual preview
NSW-11
Бренд: Naxa Страницы: 22
Acrox Technologies KB15 User Manual preview
KB15
Бренд: Acrox Technologies Страницы: 8
Xtify XG-K2-R-RGB User Manual preview
XG-K2-R-RGB
Бренд: Xtify Страницы: 30
Franklin BOOKMAN DMQ-440 User Manual preview
BOOKMAN DMQ-440
Бренд: Franklin Страницы: 22
Totally Wicked Rival User Manual preview
Rival
Бренд: Totally Wicked Страницы: 11
Yamaha Keyboard Manual preview
Keyboard
Бренд: Yamaha Страницы: 52
Yamaha KX25 Owner'S Manual preview
KX25
Бренд: Yamaha Страницы: 56
Brookstone 849809 User Manual preview
849809
Бренд: Brookstone Страницы: 6
Atmos Nation AtmosRx User Manual preview
AtmosRx
Бренд: Atmos Nation Страницы: 20
Foxxray ShineLight FXR-HKO-11 User Manual preview
ShineLight FXR-HKO-11
Бренд: Foxxray Страницы: 9
Cypress CY4636 User Manual preview
CY4636
Бренд: Cypress Страницы: 126
Janty MiD One User Manual preview
MiD One
Бренд: Janty Страницы: 41
General Music WK 6 Service Manual preview
WK 6
Бренд: General Music Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды