manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

Pattern Jobs

MOTIF XS Owner’s Manual

223

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf

ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

Pattern Job Procedure

1

From the Pattern Play display, press the [JOB] 
button to enter the Pattern Job mode. 

2

Select the desired Job menu by pressing one 
of the [F1] – [F6] buttons. 

3

Move the cursor to the desired Job by using 
the data dial, [INC/DEC] and [DEC/NO] buttons, 
then press the [ENTER] button to call up the 
Job display. 

4

Move the cursor to the desired parameter, then 
set the value by using the data dial, [INC/YES] 
and [DEC/NO] buttons. 

5

After setting, press the [ENTER] button to 
execute the Job. 

“Completed” will appear when the Job is done. 

In some Jobs, the operation overwrites any data previously 

existing in the destination memory. Important data should 

always be saved to a USB storage device connected to the 

USB TO DEVICE terminal or to a computer connected to the 

same network as the MOTIF XS (page 278). 

6

Press the [EXIT] button twice to go back to the 
Pattern Play display. 

n

If there is no data in the specified range, “No Data” will 

appear on the display and the Job cannot be executed. 

n

If you make a mistake or want to compare the sound of the 

data before and after executing a Job, press the [F1] 

button to use the Undo/Redo function. 

Even if a Job operation has been completed, selecting a 

different Pattern or turning the power off without storing will 

erase the Pattern data. Make sure to store the Pattern data to 

internal memory by pressing the [STORE] button before 

selecting a different Pattern or turning the power off. 

n

Some of the Jobs which enable you to copy the Sample 

Voice from the source to the destination execute the actual 

copy operation only when the Bank Select and Program 

Change events which specify the Sample Voice are 

recorded in the source Track. 

[F1] Undo/Redo

This is the same as in the Song Job mode. See page 196. 

[F2] Note Jobs 

The Note Jobs in the Pattern mode are basically same as in 
the Song Job mode. However, unlike in the Song Job 

mode, Pattern Note Jobs are applied to the Phrases (001 – 
256) and a selected range in the Phrase (measure : beat : 
clock). 

[F3] Event Jobs

The Event Jobs in the Pattern mode are basically same as 
in the Song Job mode. However, unlike in the Song Job 
mode, Pattern Event Jobs are applied to the Phrases (001 
– 256) and a selected range in the Phrase (measure : beat 
: clock). 

n

In “03: Erase Event Job,” “Tempo Change,” “Scene Memory,” 
or “Track Mute” cannot be selected as Event Types, unlike in 
the Song Erase Event Job. 

n

In “05: Create Continuous Data Job” and “07: Modify Control 
Data Job,” “Tempo Change” cannot be selected as Event 
Types, unlike in the Song Job mode. 

[F4] Phrase Jobs

This Job copies a selected Phrase to the designated 
destination Phrase. Also the Sample Voices used in the 
selected Phrase can be copied. This is useful if you are 
creating a Pattern and wish to use the Phrase data from 
another Pattern. 

1

Source Phrase

2

Destination Phrase

Determines the Pattern number (01 – 64) and Phrase 
number (001 – 256) of the source and destination 
respectively. 

3

Copy Sample Voice

When this box is checkmarked, Sample Voices assigned to 
the source Phrase are copied to the destination Phrase as 
Sample Voices, and are assigned to the corresponding 
tracks in the selected Pattern. Make sure to set this 
parameter to on when coping the Phrase using the Sample 
Voice. When there is no memory available in the 
destination Pattern for Sample Voice data, an alert 
message will appear on the display and the Sample Voice 
data will not be copied. If this occurs, use Sample Job 02: 
Delete to delete any unused samples, then try again. 

CAUTION

CAUTION

01: Copy Phrase

1

2

3

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Hama Nimble Operating Instruction preview
Nimble
Бренд: Hama Страницы: 10
Hama 2100 Operating Instruction preview
2100
Бренд: Hama Страницы: 10
Kawai FS900 Owner'S Manual preview
FS900
Бренд: Kawai Страницы: 48
cefar ACTIV XT User Manual preview
ACTIV XT
Бренд: cefar Страницы: 148
Datadesk TrackBoard Short Form Instructions preview
TrackBoard
Бренд: Datadesk Страницы: 2
COP-USA AU40M User Manual preview
AU40M
Бренд: COP-USA Страницы: 15
Optimus 42-4041 Owner'S Manual preview
42-4041
Бренд: Optimus Страницы: 60
Samsung ER-390 SERIES Service Manual preview
ER-390 SERIES
Бренд: Samsung Страницы: 2
Samsung ER-260 SERIES Service Manual preview
ER-260 SERIES
Бренд: Samsung Страницы: 2
PNI ESCORT P03 B User Manual preview
ESCORT P03 B
Бренд: PNI Страницы: 32
APRI FBSN-4FD Assembly Manual preview
FBSN-4FD
Бренд: APRI Страницы: 5
Franklin DEUTSCH-ENGLISCH LEXIKON BQD-210 User Manual preview
DEUTSCH-ENGLISCH LEXIKON BQD-210
Бренд: Franklin Страницы: 13
Ranger PALMTOP Keyboard II User Manual preview
PALMTOP Keyboard II
Бренд: Ranger Страницы: 7
Hama K 404 Operating Instruction preview
K 404
Бренд: Hama Страницы: 4
Hamichord MC-3 User Manual preview
MC-3
Бренд: Hamichord Страницы: 17
Logan BrailleCoach Instruction Manual preview
BrailleCoach
Бренд: Logan Страницы: 6
Tecknet X373 Instructions Manual preview
X373
Бренд: Tecknet Страницы: 6
Tecknet X331 User Manual preview
X331
Бренд: Tecknet Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды