manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

MOTIF XS Owner’s Manual

218

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

Pattern Recording

In the Pattern Record mode, you can record your keyboard performance to create a Phrase as a basic material of the 
Pattern data. The created Phrase is assigned to the specified track automatically. Press the [

I

] (Record) button from the 

Pattern Play mode to enter the Pattern Record mode. 

n

Recording of audio data can be done in the Sampling Record mode (page 242). 

Realtime Recording

This method lets you record the performance data as it is 
played, allowing you to capture all the nuances of an actual 
keyboard performance. Recording can be done while 
monitoring playback of other already-recorded tracks. 
You can select one of two methods for Realtime recording: 
Replace and Overdub. 

Pattern Recording procedure 

Here in outline form is the process of recording a Pattern. 

1

Select a Pattern, then select a Section to be 
recorded. 

Press the [PATTERN] button to go to the Pattern Play 
display (page 210), and select a Pattern, then a Section 
to be recorded. Select an empty Pattern if you wish to 
create a new Pattern from scratch. If an empty Pattern 
is not available, delete an unnecessary Pattern by 
using the Clear Pattern Job (page 228). 

2

Press the [

I

] (Record) button to call up the 

Record Setup display (page 219). 

3

Set recording-related parameters in the Record 
Setup display. 

Select the track to be recorded and the Recording 
method to prepare for Pattern Recording. 
When selecting a track to which no Phrase has been 
assigned, your keyboard performance will be recorded 
to an empty Phrase which will be assigned to the 
recording track. When selecting a track that already 
has an assigned Phrase, that Phrase will be replaced 
by your recorded performance. If you wish to record 
using an Arpeggio, set the necessary parameters from 
the Arpeggio display (page 219). 

4

Record your keyboard performance in real time 
to create a Phrase. 

Press the [

F

] (Play) button to start recording. Press the 

[

J

] (Stop) button to stop recording. 

5

Edit the recorded Phrase using the Pattern Job 
(page 222) and Pattern Edit (page 220). 

6

Store the Pattern (including the recorded 
Phrase) to internal User Memory. 

Press the [STORE] button to call up the Pattern Store 
window then store the created Pattern. 
This ensures that the created Pattern will be retained 
even if the power is turned off. 

The recorded Pattern will be lost when selecting a different 
Pattern, calling up a different mode, or turning the power off. 
Make sure to store the Pattern data to internal memory by 
pressing the [STORE] button before selecting a different 
Pattern, calling up a different mode, or turning the power off. 

7

Save the created Pattern data to a USB storage 
device or to a connected computer as desired 
(page 278). 

Storing a Pattern—[STORE] 
(Pattern Store)

This section covers how to store the Pattern you have 
recorded and edited. By executing the Store operation, the 
Pattern data you have created will be retained even if the 
power has been turned off. Pressing the [STORE] button 
calls up the Pattern Store window. 
The following data will be stored by Pattern Store. 

Sequence data

Currently selected Pattern (Section A – P), Pattern Chain, 
Phrase 001 – 256 

Tone Generator data

Mixing settings (Common Edit parameters and Part Edit 
parameters)

n

The Mixing Voices can be edited in the Mixing Voice Store 
window (page 240). 

The Pattern Store operation is the same as that of Voice 
Store (page 97) and Song Store (page 186). 

This operation overwrites any data already existing in the 

destination Pattern. Select a Pattern number containing no data or 

unnecessary data. 

n

If there is not enough memory space for the Song/Pattern, an 
alert message appears, and you will not able to store any 
additional Songs/Patterns. If this happens, delete 
unnecessary Patterns/Songs by using the Song/Pattern Job, 
then try the Store operation again.

CAUTION

CAUTION

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Handy Tech Easy Braille User Manual preview
Easy Braille
Бренд: Handy Tech Страницы: 39
Vaporesso VECO GO User Manual preview
VECO GO
Бренд: Vaporesso Страницы: 28
Besta All Pass S1 Manual preview
All Pass S1
Бренд: Besta Страницы: 9
Panasonic SXKC211 - ELECTRONIC KEYBOARD Owner'S Manual preview
SXKC211 - ELECTRONIC KEYBOARD
Бренд: Panasonic Страницы: 36
Totally Wicked Odyssey User Manual preview
Odyssey
Бренд: Totally Wicked Страницы: 19
Fcar F7S series Product Manual preview
F7S series
Бренд: Fcar Страницы: 56
Intraphex MRB-UNO1 Installation Manual preview
MRB-UNO1
Бренд: Intraphex Страницы: 4
Motion Computing Motion J Series User Manual preview
Motion J Series
Бренд: Motion Computing Страницы: 2
Encore BSD–4 Installation Manual preview
BSD–4
Бренд: Encore Страницы: 5
CBC Ganz ZCA-SC Series User Manual preview
Ganz ZCA-SC Series
Бренд: CBC Страницы: 30
Yamaha Keyboard Manual preview
Keyboard
Бренд: Yamaha Страницы: 52
Yamaha KX25 Owner'S Manual preview
KX25
Бренд: Yamaha Страницы: 56
Precor P30 Console Operating And Maintaining preview
P30 Console
Бренд: Precor Страницы: 156
Shun Bao Technology AMO User Manual preview
AMO
Бренд: Shun Bao Technology Страницы: 16
Vicon V422-VI Installation & Operation Manual preview
V422-VI
Бренд: Vicon Страницы: 16
Tomahawk COACH BY COLOR Manual preview
COACH BY COLOR
Бренд: Tomahawk Страницы: 44
Diablotek KYB-107U Specifications preview
KYB-107U
Бренд: Diablotek Страницы: 1
Guardian 7001 Use & Care Instructions Manual preview
7001
Бренд: Guardian Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды