manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

Creating a Voice/Performance by Using the Sampling Function

MOTIF XS Owner’s Manual

166

Sampling Record—[F6] Standby

This display is used for executing Sampling. Press the [F6] 
button from the Setup display to call up this display. Press 
the [EXIT] button to go back to the Setup display. 

1

Waveform 

(Indication only)

Indicates the number and name of the selected Waveform. 

2

Key (Key Range) 

(Indication only)

Indicates the key range of the currently selected Key Bank. 

3

Velocity (Velocity Range) 

(Indication only)

Indicates the velocity range of the currently selected Key 
Bank. 

4

Record Monitor

Determines the output level of the monitor for the input 
signal while Sampling. The time indicated here is 
calculated assuming a mono signal with a sampling 
frequency of 44.1 kHz. This monitor signal is output from 
the PHONES jack or the OUTPUT R and L/MONO jacks. 

Settings:

0 – 127

5

Record Gain

This parameter is available only when the Input Source 
(page 164) is set to “resample” (recording the sound of the 
MOTIF XS itself). This determines the recording gain when 
resampling. The higher the value, the greater the volume of 
the resampled sound. Before executing the Sampling 
operation, you can set the appropriate gain by checking 
the volume via the Level Meter (

)

) while playing the 

keyboard. 

Settings:

-12dB, -6dB, +0dB, +6dB, +12dB

6

Key

Indicates the Keybank (page 165) set in the Sampling 
Record Setup display. The Key Bank can be changed both 
here and in Sampling Edit (page 167) after the Sampling 
operation. 

Settings:

C -2 – G8

n

You can also set the Key directly from the keyboard, by 
holding down the [SF6] KBD button and pressing the desired 
key. For details, see page 82. 

7

Trigger Level

When the Trigger Mode (

8

) is set to “level,” you’ll also 

need to set the Trigger Level. Sampling will begin as soon 
as an input signal exceeding the specified trigger level is 
received. The level set here will be indicated as a red 
triangle in the level meter. For best results, set this as low 
as possible to capture the entire signal, but not so low as to 
record unwanted noise.

Settings:

000 – 127

8

Trigger Mode

Determines the method by which Sampling will be triggered.

Settings:

level, manual

level

Sampling starts as soon as an input signal exceeding the specified 
Trigger Level (

7

) is received. 

manual

Sampling starts soon after you press the [F6] REC button. This setting 
lets you start Sampling at your desired timing regardless of the input 
level from audio source. 

9

Recordable Time 

(Indication only)

Indicates the available Sampling time using the available 
memory. The time indicated here is calculated assuming a 
mono signal with a sampling frequency of 44.1 kHz. The 
amount of memory space currently being used is shown in 
the display as a blue line. 

)

Level Meter

This graph indicates the input level of the input source. Try 
to get the input level as high as possible without clipping 
for the best sound quality. 

n

Follow the instructions below to adjust the input level. 

• When the Input Source is set to A/D Input, adjust the input 

signal level by using the GAIN knob on the rear panel. If you 
cannot adjust the input level appropriately, change the Mic/
Line setting (page 263) in the Utility mode. 

• When the Input Source is set to Resample, adjust the input 

signal level by setting the Record Gain (

5

). 

• When the Input Source is set to mLAN, the input level 

cannot be adjusted. 

!

[SF1] Confirm

This determines whether you can confirm the recorded 
Sample (on) or not (off) after Sampling is finished. This is 
useful for conveniently recording again if you are not 
satisfied with the Sampling results. When this is turned off, 
the recorded sample is fixed as data as soon as the 
Sampling is finished then the instrument returns to the 
Setup display (page 164). Please note that the instrument 
returns to the STANDBY display after the Sampling is 
finished when Record Next is turned on in the Setup 
display. 

@

[F5] Start

Press this button to start Sampling. 
When the Trigger mode is set to “level,” pressing the [F5] 
Start button calls up the WAITING indication on the display. 
Actual Sampling does not start. When audio signal 
exceeding the specified Trigger Level (

7

) is input to the 

instrument, the RECORDING indication replaces the 
WAITING indication and Sampling starts. 

1

2

4

5

6

3

7

8

9

)

@

!

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

R-Go Numpad Break Manual preview
Numpad Break
Бренд: R-Go Страницы: 14
TomTom LINK 105 Installation Manual preview
LINK 105
Бренд: TomTom Страницы: 22
M-Audio OXYGEN49 User Manual preview
OXYGEN49
Бренд: M-Audio Страницы: 80
Rajant 23-100068-001 Quick Start Manual preview
23-100068-001
Бренд: Rajant Страницы: 11
I-Tech YMil-K800 Quick Manual preview
YMil-K800
Бренд: I-Tech Страницы: 3
Technics SX-KN200 Owner'S Manual preview
SX-KN200
Бренд: Technics Страницы: 19
NAKTO LCD-M5 Instructions Manual preview
LCD-M5
Бренд: NAKTO Страницы: 6
TRONIAN TAUTRON Manual preview
TAUTRON
Бренд: TRONIAN Страницы: 19
Adesso WKB-3000UB User Manual preview
WKB-3000UB
Бренд: Adesso Страницы: 9
Targus AKB631 User Manual preview
AKB631
Бренд: Targus Страницы: 5
Garmin BC 30 Quick Start Manual preview
BC 30
Бренд: Garmin Страницы: 62
Franklin MWS-1840 User Manual preview
MWS-1840
Бренд: Franklin Страницы: 30
CAVE K10 Quick Setup Manual preview
K10
Бренд: CAVE Страницы: 4
usa-spec PA12-BMW Owner'S Manual preview
PA12-BMW
Бренд: usa-spec Страницы: 12
Accuratus KYBAC210-PS2HY Datasheet preview
KYBAC210-PS2HY
Бренд: Accuratus Страницы: 1
Precor Console Owner'S Manual preview
Console
Бренд: Precor Страницы: 101
Abt ABT-AEC Assembly Instructions Manual preview
ABT-AEC
Бренд: Abt Страницы: 19
Sandberg 630-40 User Manual preview
630-40
Бренд: Sandberg Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды