manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

Creating a Voice/Performance by Using the Sampling Function

MOTIF XS Owner’s Manual

164

10

Press the [F6] Stop button to stop Sampling. 

If you set Confirm to on in step 7 above, the Sampling 
Finished display (page 167) appears. Press the [SF1] 
Audition button to hear the sampled sound. If you are 
satisfied with the results, press the [ENTER] button to 
store the sampled sound as a “Sample” and return to 
the Setup display. If you are not satisfied with the 
results and you wish to try again, press the [EXIT] 
button to return to the Standby display and try 
Sampling from step 5 again. 

If you set Confirm to off in step 7 above, the sampled 
sound will be stored as a “Sample” automatically. 

n

When you set Record Next (

4

) to “on” in step 4 above, 

the instrument returns to the STANDBY display after the 

Sample data is fixed. In this case, you can leave the 

Sampling Record mode by pressing the [EXIT] button. 

11

Save the created Waveform to a USB storage 
device. 

For detailed instructions on saving, see page 278. 

The recorded (edited) Sample data resides temporarily in 

DIMM (page 79). Any data in DIMM will be lost when turning 

the power off. You should always save any data residing in 

DIMM to a USB storage device or a computer connected to 

the same network as the MOTIF XS before turning off the 

power. 

Sampling Setup—[F6] Rec

From this display you can set up various parameters for 
Sampling. Press the [F6] button from the Sampling Main 
display to call up this display. Press the [EXIT] button to go 
back to the Sampling Main display. 

1

Recording Type

Determines the Sampling type. Keep in mind that this 
parameter is fixed to “sample” when entering the Sampling 
mode from the Voice/Performance mode. 

2

Input Source

Determines the input connector via which the signal to be 
sampled will be received. 

Settings:

A/D Input, resample, mLAN

A/D Input

Analog audio from the A/D INPUT jacks is recognized as the recording 
source. 

resample

Audio signal from the OUTPUT jacks of the MOTIF XS is received and 
recognized as the recording source. 

mLAN

Audio signal from the mLAN connector (available for MOTIF XS8 and 
available for MOTIF XS6/7 only when the optional mLAN16E2 has been 
installed) is recognized as the recording source. The audio signal here 
is transmitted from the computer via mLAN Ports 3 and 4. 

3

Stereo/Mono

Determines whether the audio signal is recorded as mono 
Sample or stereo Sample. 

Settings:

monoL, monoR, monoL+R, stereo

monoL

The L-channel signal will be recorded as a mono Sample. 

monoR

The R-channel signal will be recorded as a mono Sample. 

monoL+R

The L-channel and R-channel signals will be mixed and recorded as a 
mono Sample. 

stereo

A stereo Sample will be recorded. 

4

Record Next

When set to on, the next key is set as destination of 
Sampling automatically after the Sampling operation is 
finished (including assignment of the Sample to a Key 
Bank), and the Standby display appears. This parameter is 
useful when you wish to record multiple Samples in 
succession. 
When you wish to obtain Samples successively from a 
special CD containing various materials in each track, for 
example, you can set this parameter to on and set the 
Trigger Mode to “level”—and conveniently have the 
instrument record consecutive Samples automatically. To 
leave the Sampling Record mode, press the [EXIT] button. 

Settings:

on, off

n

When both of the [SF1] Confirm and the Record Next are 
turned on before the Sampling starts, the FINISHED display 
appears as soon as the Sampling is finished. From the 
FINISHED display, fix the Sample data by pressing the 
[ENTER] button so that the instrument returns to the STANDBY 
display. 

n

This parameter is useful when you wish to assign individual 
Samples to the keys one by one to create a Drum Voice by 
using the special CD containing sound of each drum 
instrument as source. 

n

Keep in mind that the Record Next parameter may be fixed to 
“off” and cannot be changed. This occurs when you enter the 
Sampling mode from the Voice mode/Performance mode, set 
the Voice to something other than “off,” and set the Source 
(above) to “resample.”

CAUTION

1

2

3

4

5

@

6

7
8

9

!

#

$

)

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Бренд: Jacob Jensen Страницы: 2
Withings Pulse HR Quick Installation Manual preview
Pulse HR
Бренд: Withings Страницы: 16
Matrix Premium S5x Instructions Manual preview
Premium S5x
Бренд: Matrix Страницы: 12
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Бренд: C-KO Страницы: 4
Pella alula RE524XP Installation Manual preview
alula RE524XP
Бренд: Pella Страницы: 4
Sven KB-E5500 User Manual preview
KB-E5500
Бренд: Sven Страницы: 4
swissonic ControlKey 49 User Manual preview
ControlKey 49
Бренд: swissonic Страницы: 32
A4Tech RFKBS-25A Quick Start Manual preview
RFKBS-25A
Бренд: A4Tech Страницы: 9
X-Armour XR-9500 Installation And Owner'S Manual preview
XR-9500
Бренд: X-Armour Страницы: 16
Loshine KG9015 Quick Manual preview
KG9015
Бренд: Loshine Страницы: 2
Asus GK1050 User Manual preview
GK1050
Бренд: Asus Страницы: 21
Asus EeeKeyboard PC EK1542 User Manual preview
EeeKeyboard PC EK1542
Бренд: Asus Страницы: 48
Directed Electronics VIPER 5101 Owner'S Manual preview
VIPER 5101
Бренд: Directed Electronics Страницы: 44
Directed CHRYSLER4 Installation Manual preview
CHRYSLER4
Бренд: Directed Страницы: 23
Advent RVM740 User Manual preview
RVM740
Бренд: Advent Страницы: 10
Beurer as80 Quick Start Manual preview
as80
Бренд: Beurer Страницы: 40
Franklin Deutsch/Englisch Professor DBD-440 User Manual preview
Deutsch/Englisch Professor DBD-440
Бренд: Franklin Страницы: 18
KAP MB 2010 PAS DC3 Instruction Manual preview
MB 2010 PAS DC3
Бренд: KAP Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды