Yamaha MOTIF RACK ES, Дополнительное руководство

Страница: 37 / 37

37
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following.
Sound does not change when using the knobs or sliders.
• Are the MIDI Out port and Device Number set correctly in the “Setup dialog”? ( page 31 )
Bulk data is not transmitted.
• Are the MIDI Out port and Device Number set correctly in the “Setup dialog”? ( page 31 )
• Is the Dump Interval in the “Setup dialog” too short? Make sure to adjust the Dump Interval.
Bulk data is not received. Time-out errors are frequent.
• Are the MIDI Out port and Device number set correctly in the “Setup dialog”? ( page 31 )
• Depending on the host application, you may need to turn MIDI Thru setting off in the host
application.
• When running the Multi Part Editor as an SQ01 plug-in, reduce the buffer size in SQ01
under [Setup] menu
→
[MIDI]
→
[System Exclusive]
→
Receive Buffer Size.
The MIDI In/Out port is not available in the “Setup dialog”.
• Only MIDI Ports selected in the host applications MIDI Setup can be selected in the “Setup
dialog”. Confirm the ports selected in the host application.
Remote operation functions don’t work.
• Is the remote output port set correctly in the “Setup dialog”? ( page 31 )
• Is the remote operation device configured correctly? When using the 01X as a remote oper-
ation device, make sure the REMOTE and MIDI buttons are on.
Parts using User Voices do not sound correctly.
• Has the User Voice data been transmitted to the MOTIF-RACK ES? ( page 32 )
By transmitting the Multi settings, you can play the MOTIF-RACK ES with the newly trans-
mitted voice data.
Noise is audible during remote operation
For Windows XP users:
• The condition may improve if you enable Hyper-Threading in the BIOS settings.
For information on how to enable Hyper-Threading, refer to the owner’s manual of your
computer.