Yamaha MOTIF RACK ES, Дополнительное руководство

Страница: 32 / 37

32
“Transmit Dialog”
Voice data can be transmitted in bulk to your synthesizer. Select the bulk voice data you wish to
receive, then click [Start]. The progress bar shows how much of the data has been transmitted.
Finally, click the [Close] button to quit the dialog.
n
When transmitting user voice data to the MOTIF-RACK ES, user voice data in the MOTIF-RACK ES
will be overwritten. Exercise caution so as not to accidentally overwrite a User voice that you have
used in another Multi configuration.
n
When the User Voice of any given part is already selected, transmit the Multi settings to the MOTIF-
RACK ES after you bulk transmit the User Voice data. By transmitting the Multi settings you can play
the MOTIF-RACK ES the newly transmitted voice data.
n
Transmission time can be set under “Dump Interval” on the “Setup dialog” ( page 31 ).
1
Transmit Type .................. Click this and select which user voice data to transmit to the MOTIF-
RACK ES.
Normal User 1+2+3+Drum ..... All Normal User 1-3 voices and Drum voices
Normal User 1 ........................ All Normal User 1 voices
Normal User 2 ........................ All Normal User 2 voices
Normal User 3 ........................ All Normal User 3 voices
Normal User 1+2+3 ................ All Normal User 1-3 voices
Drum User .............................. All Drum User voices
n
Voice data for optional plug-in boards can not be transmitted.
2
Progress Bar ................... Indicates how much of the data has been transmitted.
3
Start ................................ Click this to begin the transmission. Once transmission has started,
this button changes to a [Stop] button. Clicking [Stop] will stop the
transmission.
4
Close............................... Click this to close this dialog.
n
The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see
page 31 .
1
2
4
3