Yamaha MOTIF RACK ES Скачать руководство пользователя

Страница: 15 / 112

Owner’s Manual

Star

ting Up

Connections Connecting to external audio equipment

Connections

Connecting to external audio
equipment

Since the MOTIF-RACK ES has no built-in speakers, you’ll need an
external audio system or a set of stereo headphones to properly
monitor it. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio
equipment, as described in the following illustrations. The
following illustrations show various connection examples; use the
one most similar to your intended setup.

Connecting stereo powered speakers

A pair of powered speakers can accurately produce the
instrument’s rich sounds with their own pan and effect settings.
Connect your powered speakers to the OUTPUT L/MONO and R
jacks on the rear panel.

When using just one powered speaker, connect it to the OUTPUT L/MONO jack
on the rear panel.

Connecting to a mixer

The MOTIF-RACK ES features ASSIGNABLE OUTPUT 1-4 jacks in
addition to the OUTPUT (L/MONO and R) jacks. Connect these
outputs to a mixer for separately controlling the analog outputs of
Drum keys or Parts (Performance and Multi). For details on how to
set the Part/output jack assignments, refer to the chart below.

Outputting separate notes (keys) of a Drum Voice

Set this from the “OutputSel” parameter (as selected below) as
Drum Voice data.

This setting is available for Parts for which the “OutputSel”
parameter has been set to “drum.”

The “OutputSel” parameter is available only when the “InsEFOut” parameter is
set to “thru” in the OSC display.

Outputting separate Parts of a Performance

Set this from the “OutSel” parameter (as selected below).

Outputting separate Parts of a Multi

Set this from the “OutSel” parameter (as selected below).

The following settings can be made from the parameter pages
listed above.

About the main output jacks and the Assignable Output jacks

• Connecting a pair of headphones does not affect audio output from the

OUTPUT (L/MONO and R) jacks. You can monitor the same sounds via
headphones and at the OUTPUT jacks.

• Any Parts/Drum keys assigned to the ASSIGNABLE OUTPUT jacks will not be

output through the OUTPUT L/MONO and R jacks or PHONES jack.

• The System Effects (Reverb, Chorus), the Master EQ, and the Master Effect

are not applied to the sound output through the ASSIGNABLE OUTPUT jacks.
(Only the Part EQ and the Insertion Effect are applied.)

• The output from the ASSIGNABLE OUTPUT jacks is not affected by the

[VOLUME] knob.

• In Voice mode, the Normal Voice will not be output via the ASSIGNABLE

OUTPUT jacks.

[SHIFT] + [DRUM]

→

select Drum Voice

→

[EDIT]

→

select key with [SHIFT] +

PART [

][

]

→

OSC display

→

“OutputSel”

MOTIF-RACK ES

OUTPUT L/MONO

OUTPUT R

PHONES

Powered speaker

(Left)

Headphones

Powered speaker

(Right)

[SHIFT] + [PERFORM]

→

select Performance

→

[EDIT] (Performance Edit

mode)

→

[MUTE/SEL/ENTER] (LED turns off)

→

select Part

→

Output display

→

“OutSel”

[MULTI] (LED lights in green)

→

select Multi

→

[EDIT]

→

[MUTE/SEL/ENTER]

(LED turns off)

→

select Part

→

Output display

→

“OutSel”

Display

indication

Output jacks

Stereo/Mono

L&R

OUTPUT L and R

Stereo

as12

ASSIGNABLE OUTPUT 1 and 2

Stereo (1: L, 2: R)

as34

ASSIGNABLE OUTPUT 3 and 4

Stereo (3: L, 4: R)

as1

ASSIGNABLE OUTPUT 1

Mono

as2

ASSIGNABLE OUTPUT 2

Mono

as3

ASSIGNABLE OUTPUT 3

Mono

as4

ASSIGNABLE OUTPUT 4

Mono

drum
(only Drum Voice)

The jack set in the “OutputSel”
parameter in “Outputting separate
notes (keys) of a Drum Voice” above.

Depends on the
“OutputSel” value

ASSIGNABLE OUTPUT 2

ASSIGNABLE OUTPUT 3

ASSIGNABLE OUTPUT 4

ASSIGNABLE OUTPUT 1

OUTPUT R

OUTPUT L/MONO

MOTIF-RACK ES

OUTPUT L/R

PHONES

Headphones

Mixer

Amplifier

Speaker
(Left)

Speaker
(Right)

Содержание MOTIF RACK ES

















































































































Результаты поиска

Содержание MOTIF RACK ES

Отзывы:

Похожие инструкции для MOTIF RACK ES

Бренды по названию

Популярные бренды

Yamaha MOTIF RACK ES, Руководство пользователя

Результаты поиска

Содержание MOTIF RACK ES

Отзывы:

Похожие инструкции для MOTIF RACK ES

Бренды по названию

Популярные бренды