manualshive.com logo in svg

Yamaha MOTIF ES6, Руководство пользователя

Yamaha MOTIF ES6 - электронная рабочая станция, предназначенная для музыкантов и звукорежиссеров. Получите бесплатное руководство по установке программного обеспечения и другие мануалы на manualshive.com. Просто загрузите их, чтобы начать использование всех функций этого впечатляющего устройства.

Поделиться
Скачать
background image

Refer

ence

  Utility Mode

Utility Job mode

265

Owner’s Manual

In this Mode, you can restore this synthesizer’s User memory (page 186) to the factory default settings (Factory Set). For details, see page 44.

n

Since the settings of the Plug-in Boards in the Utility mode are stored not to internal User memory but to the memory on the respective boards themselves, 
the data cannot be restored with this Job. 

■ 

Supplementary

Setting the default display when turning the power on

1

Enter the desired mode and the program number you wish to call up first when turning the power on. 

2

Press the [ENTER] button while holding the [STORE] button to register the mode and program number set in step #1. 

3

Set the PowerOnMode parameter to “last” in the [UTILITY] 

→

→

→

→

 [F1] GENERAL 

→

→

→

→

 [SF4] OTHER display. 

4

Press the [STORE] button to store the Utility setting made in step #3 above. 

5

Turn the power off and turn the power on again to call up the mode/program number set in step #2 to the display. 

[SF4] OTHER

MIDI IN/OUT

Determines which physical output terminal(s) will be used for transmitting/receiving MIDI data: MIDI IN/OUT, USB, or 
mLAN (when the optional mLAN16E has been installed). 

Settings:

MIDI, USB, mLAN

n

Three types of terminals above cannot be used at the same time. Only one of them can be used to transmit/receive MIDI data. 

ThruPort (Through Port)

Many computer sequencers are capable of transmitting data over several MIDI ports, effectively breaking the 16-
channel barrier. When using the USB terminal or mLAN terminal (when the optional mLAN16E has been installed) for 
MIDI transmission/reception, you can have this synthesizer respond to MIDI data over one port, while relaying the 
data for another port number (you can set here) to a separate tone generator (connected to the MIDI OUT terminal). 
In this way, 16 channels of data can be played on this synthesizer and another 16 can be played on the connected 
MIDI device.

Settings:

1~8

n

When the mLAN16E has been installed and the MIDI IN/OUT is set to mLAN, ports 5 ~ 8 are not available even if you set them 
here.

[F6] PLUG

[SF1] STATUS

Plug1: ~ Plug3:

Indicates the name of the Plug-in Board which has been installed to this synthesizer. 

PolyExpand

This parameter is accessible only when you have two or three identical Plug-in boards installed. The “off” setting 
enables two or three boards to work separately (you can select them for two or three different Parts). When this is set 
to “on,” the two boards effectively function together as one board (used in a single part) — giving you double the 
amount of polyphonic notes you can play at one time.

Settings:

on, off

[SF2] MIDI

From this display you can set various MIDI-related parameters for the Plug-in board.

DEVNO. (Device Number)

Determines the MIDI Device Number of the Plug-in Board. This number must match the Device Number of the 
external MIDI device when transmitting/receiving bulk data, parameter changes or other system exclusive 
messages.

Settings:

1~16, all, off

PORTNO. (Port number)

Determines the MIDI Port number over which the Plug-in board receives MIDI data in the multi-timbral tone 
generator mode (Song/Pattern modes). One port can be set for a Multi-part Plug-in board and two ports can be set 
for a Single part Plug-in board. 

Settings:

off, 1~3

n

The Port number for the Effect Plug-in board (VH) is fixed to 1.

n

For information on the Plug-in board and the internal tone generator block, see page 163. 

GM/XG

Determines whether “GM on” and “XG on” messages are recognized (on) or not (off). This parameter is available 
only when a Multi-part Plug-in board has been installed to slot 3.

Settings:

on, off

[SF3] NATIVE1

From this display you can set the Native System parameters of the Plug-in board installed to slot 1. 
For details on the parameters, refer to the owner’s manual of your particular Plug-in board.

[SF4] NATIVE2

From this display you can set the Native System parameters of the Plug-in board installed to slot 2. 
For details on the parameters, refer to the owner’s manual of your particular Plug-in board.

[SF5] NATIVE3

From this display you can set the Native System parameters of the Plug-in board installed to slot 3. 
For details on the parameters, refer to the owner’s manual of your particular Plug-in board. 

Utility Job mode

[UTILITY] 

→

 [JOB]

[UTILITY] 

→

→

→

→

 [F1] GENERAL 

→

→

→

→

 [SF4] OTHER 

→

→

→

→

 PowerOnMode

Содержание MOTIF ES6













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF ES6

Logitech G915 Manual preview
G915
Бренд: Logitech Страницы: 14
Digitsole Run Profiler User Manual preview
Run Profiler
Бренд: Digitsole Страницы: 9
ENSONIQ KT-76 Musician'S Manual preview
KT-76
Бренд: ENSONIQ Страницы: 249
Ortek PKA-1720A User Manual preview
PKA-1720A
Бренд: Ortek Страницы: 10
M-Edge BACKLIT Instruction Manual preview
BACKLIT
Бренд: M-Edge Страницы: 5
Korg MS-10 Owner'S Manual preview
MS-10
Бренд: Korg Страницы: 38
Canon Electronic Dictionary Quick Reference preview
Electronic Dictionary
Бренд: Canon Страницы: 16
Linx 1010 Education Edition Quick Start Manual preview
1010 Education Edition
Бренд: Linx Страницы: 14
Sanako Lab 100 User Manual preview
Lab 100
Бренд: Sanako Страницы: 172
360VRFit M2ME IoT Sensor Instruction Manual preview
M2ME IoT Sensor
Бренд: 360VRFit Страницы: 2
Trust SILVERLINE 302KS User Manual preview
SILVERLINE 302KS
Бренд: Trust Страницы: 10
perixx PERIBOARD-335 User Manual preview
PERIBOARD-335
Бренд: perixx Страницы: 19
perixx PERIBOARD-117 User Manual preview
PERIBOARD-117
Бренд: perixx Страницы: 12
Genesis RM34X Quick Installation Manual preview
RM34X
Бренд: Genesis Страницы: 8
Genesis THOR 401 Quick Installation Manual preview
THOR 401
Бренд: Genesis Страницы: 12
Genesis NKG-1319 User Manual preview
NKG-1319
Бренд: Genesis Страницы: 11
Cherry G84-4100 Technical Data preview
G84-4100
Бренд: Cherry Страницы: 2
Cherry G84-4400 Operating Manual preview
G84-4400
Бренд: Cherry Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды