Yamaha Morphous CP250W Скачать руководство пользователя страница 8

Страница: 8 / 106

A SAFETY INFORMATION

EAU10261

SCOOTERS ARE SINGLE TRACK
VEHICLES. THEIR SAFE USE AND

1 1 OPERATION ARE DEPENDENT

UPON THE USE OF PROPER
RIDING TECHNIQUES AS WELL AS

THE EXPERTISE OF THE OPERA-
TOR. EVERY OPERATOR SHOULD

KNOW THE FOLLOWING REQUIRE-
MENTS BEFORE RIDING THIS
SCOOTER.
HE OR SHE SHOULD:

• OBTAIN THOROUGH INSTRUC-

TIONS FROM A COMPETENT
SOURCE ON ALL ASPECTS OF
SCOOTER OPERATION.

• OBSERVE THE WARNINGS

AND MAINTENANCE REQUIRE-

MENTS IN THE OWNER’S MAN-
UAL.

• OBTAIN QUALIFIED TRAINING

IN SAFE AND PROPER RIDING

TECHNIQUES.

• OBTAIN PROFESSIONAL TECH-

NICAL SERVICE AS INDICATED
BY THE OWNER’S MANUAL

AND/OR WHEN MADE NECES-
SARY BY MECHANICAL CONDI-

TIONS.

Safe riding

• Always make pre-operation

checks. Careful checks may help
prevent an accident.

• This scooter is designed to carry

the operator and passenger.

• The failure of motorists to detect

and recognize scooters in traffic is

the predominating cause of auto-

mobile/scooter accidents. Many
accidents have been caused by an
automobile driver who did not see

the scooter. Making yourself con-
spicuous appears to be very effec-
tive in reducing the chance of this
type of accident.

• Therefore:

• Wear a brightly colored jacket.
• Use extra caution when ap-

proaching and passing through
intersections, since intersec-

tions are the most likely places
for scooter accidents to occur.

• Ride where other motorists can

see you. Avoid riding in another

motorist’s blind spot.

1-1

• Many accidents involve inexperi-

enced operators. In fact, many op-
erators who have been involved in
accidents do not even have a cur-
rent driver’s license.
• Make sure that you are qualified

and that you only lend your
scooter to other qualified opera-

tors.

• Know your skills and limits.

Staying within your limits may
help you to avoid an accident.

• We recommend that you prac-

tice riding your scooter where
there is no traffic until you have

become thoroughly familiar with

the scooter and all of its con-
trols.

• Many accidents have been caused

by error of the scooter operator. A

typical error made by the operator

is veering wide on a turn due to
EXCESSIVE SPEED or undercor-
nering (insufficient lean angle for

the speed).
• Always obey the speed limit and

never travel faster than warrant-
ed by road and traffic conditions.

Содержание Morphous CP250W











































































































Результаты поиска

Содержание Morphous CP250W

Отзывы:

Yamaha Morphous CP250W, Руководство пользователя, Страница: 8 / 106

Результаты поиска

Содержание Morphous CP250W

Отзывы: