PERIODIC MAINTENANCE AND ADJUSTMENT
7-31
7
EAUU0590
Replacing a front turn signal
light bulb
ECA10670
NOTICE
_
It is advisable to have a Yamaha
dealer perform this job.
_
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
7-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the burnt out bulb by
pulling it out of the socket.
5. Insert a new bulb into the socket
by pushing it in until it stops.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the cowling.
EAUU0301
Replacing the tail/brake light
bulb or a rear turn signal light
bulb
Place the vehicle on the centerstand.
Tail/brake light bulb
1. Open the seat. (See page 4-8 for
seat opening and closing proce-
dures.)
2. Remove the tail/brake light bulb
socket by turning it counterclock-
wise.
1. Front turn signal light bulb socket
1
ZAUU0261
1. Tail/brake light bulb socket
ZAUU0154
E_4C9E1.book Page 31 Thursday, January 15, 2009 3:03 PM