PERIODIC MAINTENANCE AND ADJUSTMENT
7-31
7
EAUU0591
Replacing a front turn signal
light bulb
ECA10670
NOTICE
_
It is advisable to have a Yamaha
dealer perform this job.
_
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
7-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the burnt-out bulb by pull-
ing it out of the socket.
5. Insert a new bulb into the socket
by pushing it in until it stops.
ECAU0080
NOTICE
If a turn signal light bulb of different
wattage than recommended is
used, the turn signal light flashing
may be affected.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the cowling.
EAUU0302
Replacing the tail/brake light
bulb or a rear turn signal light
bulb
Place the vehicle on the centerstand.
Tail/brake light bulb
1. Open the seat. (See page 4-8 for
seat opening and closing proce-
dures.)
2. Remove the tail/brake light bulb
socket by turning it counterclock-
wise.
3. Remove the burnt-out bulb from
the socket by pushing it in and
turning it counterclockwise.
1. Front turn signal light bulb socket
1
ZAUU0261
1. Tail/brake light bulb socket
ZAUU0154
E_19SF8199E0.book Page 31 Thursday, January 14, 2010 9:38 AM
