65
MG24/14FX
MG32/14FX
INSPECTIONS
1.
Scope
This inspection specifications is applied to the mixer MG32/14FX and MG24/14FX.
2.
Power Supply
Power supply cord that fit the mixer’s destination shall be used.
3.
Power Indicator Inspection and Initialization of DIGITAL EFFECT
1. POWER LED shall light when the unit is turned on.
2. Turn off the both switches of EFE1 ON & EFF2 ON.
3. Turn off the power supply switch.
4. With the EFF2 ON switch and the TAP switch pushed, turn the power supply switch ON.
A finger is previously lifted from EFF2 ON switch and a finger is lifted from TAP switch after it.
(EFF1 ON, EFF2 ON and TAP LED light up.)
5.Turn the PROGRAM select switch of EFF2.
(EFF1 ON and TAP LED put out. EFF2 ON LED remain light up.)
6.In this state, wait about 5 seconds, EFF2 ON LED put off,and then turn off the power supply switch.
7.Turn the power supply switch ON, both EFF1 ON and EFF2 ON switches shall light.
If not, do the 2~7 again.
4.
Inspection
4.1 Preparation
The load resistance for each output terminals are as follows,
• PHONES (L,R):
40 ohms
Unbalanced
• ST OUT:
600 ohms
Balanced
• MONO OUT:
600 ohms
Balanced
• GROUP1-4 OUT:
600 ohms
Unbalanced
• AUX1-6 OUT:
600 ohms
Unbalanced
• Others:
10 kohms
Unbalanced
Unless otherwise specified, the operation elements shall be set as follows,
• CH (1-16: MG24/14FX, 1-24: MG32/14FX) INPUT
PAD switch
: OFF
GAIN control
: MAX (-60dBu)
HPF switch
: OFF
EQ (HIGH, MID, LOW) level control
: CENTER
EQ MID frequency control
: MIN
AUX1-4 level control
: MAX
EFF1-2 level control
: MAX
AUX1-2, 3-4 PRE switch
: OFF (POST)
AUX5, AUX6 switch
: ON when measuring AUX5, AUX6 only / OFF otherwise
PAN control
: L (ODD)
ON switch
: ON (LED shall light) when taking measurement only / OFF otherwise
PFL switch
: ON (LED shall light) when taking measurement only / OFF otherwise
1-2 switch
: ON when taking measurement only / OFF otherwise
3-4 switch
: ON when taking measurement only / OFF otherwise
ST switch
: ON when taking measurement only / OFF otherwise
Fader
: MAX
• ST CH (17-24: MG24/14FX, 25-32: MG32/14FX)
GAIN control
: MAX (-34dBu)
EQ (HIGH, HI-MID, LO-MID, LOW) level control
: CENTER
AUX1-4 level control
: MAX
EFF1-2 level control
: MAX
AUX1-2, 3-4 PRE switch
: OFF (POST)
AUX5, AUX6 switch
: ON when measuring AUX5, AUX6 only / OFF otherwise
BAL control
: L (ODD)
Содержание MG24/14fx
Страница 52: ...MG24 14FX MG32 14FX 52 Pattern side パターン側 DSP Circuit Board ...
Страница 59: ...MG24 14FX MG32 14FX 59 C C MAS 4 4 Circuit Board Scale 65 100 Component side 部品側 ...
Страница 60: ...MG24 14FX MG32 14FX 60 D D to IN CN111 t MAS 1 4 Circuit Board MAS 4 4 Circuit Board ...
Страница 63: ...MG24 14FX MG32 14FX 63 MASJK Circuit Board F F Pattern side パターン側 ...