MDX-E300
30
MDX-E300
■
SPECIAL TEST MODE
●
How to set to the special test mode
Press the
“
STANDBY/ON
”
button while pressing the
“
a
”
button and the
“
w
/
d
”
button. Then all the indicators will light up.
●
Operation procedure
Every time the
“
w
/
d
”
button is pressed, lighting of indicators and items on the display change as follows.
1)
All indicators light up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2)
All indicators turn off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3)
All indicators in grid 15 light up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4)
All indicators in grid 2 light up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5)
All indicators in grid 1 light up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6)
All indicators in grid 3-14 light up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7)
The date when the software was entered appears on the display. . . . . . . [
Rel:10/04/02
]
8)
The version of the micro processor appears on the display. . . . . . . . . . . . [
S/W
Ver
1.00
]
9)
The time of auto-marking appears on the display. . . . . . . . . . . . . . . . . . . . [
AM
Time
:C8h
]
10) The analog level of auto-marking appears on the display. . . . . . . . . . . . . [
AM
Lv1_A:24h
]
11) The digital level of auto-marking appears on the display. . . . . . . . . . . . . . [
AM
Lv1_D:1Ah
]
12) Write/read check for EEPROM appears on the display . . . . . . . . . . . . . . . [
EE
W/R
Check
]
When the INPUT button is pressed at this point, whether the micro processor executed data write/read function into
EEPROM or not is checked.
If [OK] appears on the display and the pin 6 of IC6 is at “H”, the check result is satisfactory.
[NG] is displayed when there is an error while writing or reading the data.
In such a case, check EEPROM (IC7).
13) Single play WR50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
SPWR50
:C0h
]
14) Single play WR56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
SPWR56
:FEh
]
15) Single play WR44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
SPWR44
:00h
]
16) Single play WR53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
SPWR53
:16h
]
17) Long play 2 WR50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
SPWR50
:80h
]
18) Long play 2 WR56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP2WR56
:20h
]
19) Long play 2 WR44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP2WR44
:80h
]
20) Long play 2 WR53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP2WR53
:00h
]
21) Long play 4 WR50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP4WR50
:BFh
]
22) Long play 4 WR56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP4WR56
:02h
]
23) Long play 4 WR44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP4WR44
:80h
]
24) Long play 4 WR53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [
LP4WR53
:00h
]
25) Returns the step 1 (All indicators light up).
Data to write in EEPROM (IC7)
Initial settings
INPUT mode
ANALOG
REPEAT mode
OFF
RANDOM mode
OFF
PROGRAM mode
OFF
REC mode (STEREO/MONO)
STEREO
AUTO MARK/MANUAL
AUTO (“MANUAL” does not light up.)
DISPLAY mode
DISC TITLE
●
How to cancel the special mode
Press the
“
a
”
button, and the mode will
change from the special test mode to the prod-
uct mode and the data in RAM will be cleared.
Note : Turning off the power will cancel the
special test mode but will not clear the data in
RAM (ie., user settings are maintained).
