background image

2

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1.

This unit is a sophisticated mini disc recorder. To ensure
proper operation for the best possible performance, please
read this manual carefully.

2.

Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to source of heat. Also
avoid locations subject to vibration and excessive dust, heat,
cold or moisture. Keep it away from sources of hum such as
transformers or motors.

3.

Do not place another component on top of this unit, to do so
may discolor or damage the surface of the unit.

4.

Do not open the cabinet of this unit, to do so may result in
damage to the unit or electrical shock. If any foreign object or
substance gets into the unit, contact your dealer for
assistance.

5.

When removing the power plug from the wall outlet, always
pull directly on the plug; never pull the cord itself.

6.

Do not apply excessive force when operating switches and
knobs.

7.

When moving the unit, be sure to first disconnect the power
cord from the AC outlet and disconnect all cords connecting
the unit to other equipment.

8.

Do not attempt to clean this unit with chemical solvents as this
may damage the finish. Use a clean, dry cloth.

9.

Be sure to read the “TROUBLESHOOTING” section for advice
on common operating errors before concluding that your unit
is faulty.

10.

Keep this manual in a safe place for future reference.

Note

Please check the copyright laws in your country to record from
records, compact discs, radio, etc.  Recording of copyright
material may infringe copyright laws.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.K. customers

If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.

Note:

 The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured BLUE
must be connected to the terminal which is marked
with the letter N or coloured BLACK. The wire which is
coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the
earth terminal of the three pin plug.

CLASS 1 LASER PRODUCT

This mini disc recorder is
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT
label is located on the rear
exterior.

DANGER

Invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.

CAUTION

Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.

Содержание MDX-9





























Отзывы: