MD4S
26
Press the [MARK SEARCH > |] key. When
"D2 :
SWITCH"
is displayed, confirm that all keys are
working, then press the [ENTER] key.
Press the [MARK SEARCH > |] key. When
"D3 :
JOG"
is displayed, confirm that the JOG Dial operation
has been accepted, then press the [ENTER] key.
Press the [MARK SEARCH > |] key. When
"D4 :
SHUT"
is displayed, confirm that the SHUTTLE
operation has been accepted, then press the [ENTER] key.
Press the [MARK SEARCH > |] key. When
"D5 :
MIDI I/O"
is displayed, confirm that the MTC and
the MIDI CLOCK signals appear then press the
[ENTER] key.
Press the [MARK SEARCH > |] key. When
"D6 :
ROM INIT"
is displayed, execute the initialization of
the IC of the main circuit board by pressing the
[ENTER] key.
Press the [MARK SEARCH > |] key. When the
"D7
: EXIT"
is displayed, press the [ENTER] key.
The mode returns to the ordinary mode when the
inspections from D1 to D6 are finished.
When the ending is not normal the display will show
"NOT END"
.
Press the [MARK SEARCH > |] key several times.
When the
"D8 : ATRAC"
is displayed, press the
[ENTER] key. The signal from the mixer will go
from AD to ATRAC and then to DA by passing the
MD recording and playing circuit.
Make the display to
"Df : RESET"
and press the
[ENTER] key. The mode is forced to return to the
ordinary mode.
4. Electric characteristic
4-1. MIXER SECTION
No.
Item
Standard
Condition
1
2
3
6
7
Gain between LINE IN and ST OUT
(LINE)
Gain between LINE IN and ST OUT
(MIC)
Gain between LINE IN and AUX
OUT
Gain between LINE IN and INSERT
Gain between INSERT IN and
STEREO OUT
Gain between 2TR IN and
MONITOR OUT
CH1, 2 Balanced :
+2.0 +/-2 dBm
Unbalanced :
+2.0 +/-2 dBm
CH3 ,4 :
+2.0 +/-2 dBm
CH5 – 8 :
+2.0 +/-2 dBm
CH1, 2 Balanced :
+2.0 +/-3 dBm
Unbalanced :
+2.0 +/-3 dBm
CH3, 4 :
+2.0 +/-3 dBm
CH1, 2 Unbalanced :-4.0 +/-2 dBm
CH3,4 :
-4.0 +/-2 dBm
CH1, 2 Unbalanced :+2.0 +/-2 dBm
CH3, 4 :
+2.0 +/-2 dBm
CH1, 2 :
-10 +/-2 dBm
CH1, 2 :
+2.0 +/-2 dBm
-4.0 +/-2 dBm
• INPUT CH1 – 4LINE IN : Standard input
• OUTPUT STEREO OUT L/R
• CH (CH1 – 4), MASTER FADER Maximum
• INPUT VOLUME (CH5 – 8) Maximum
• Other conditions are in standard state.
* The stereo level meters must light up to +12 or +9 dBm.
• INPUT CH1 – 4LINE IN : -50 dBm, 1 kHz
• OUTPUT STEREO OUT L/R
• GAIN VOLUME Maximum
• CH, MASTER FADER Maximum
• Other conditions are in standard state.
• INPUT CH1 – 4LINE IN : Standard input
• OUTPUT AUX SEND OUT 1, 2
• AUX VOLUME Maximum (1 or 2)
• CH FADER Maximum
• Other conditions are in standard state.
• INPUT CH1 – 4LINE IN : Standard input
• OUTPUT STEREO OUT L/R
• INPUT SELECT SWITCH : PB
• CUE LEVEL Maximum
• CUE MIX TO STEREO SWITCH : ON
• MASTER FADER Maximum
• Other conditions are in standard state.
• INPUT CH1, 2LINE IN :Standard input
• OUTPUT INSERT OUT 1, 2
• Other conditions are in standard state.
• INPUT INSERT IN1, 2 :Standard input
• OUTPUT STEREO OUT L/R
• CH, MASTER FADER Maximum
• Other conditions are in standard state.
• INPUT 2TR IN : Standard input
• OUTPUT MONITOR OUT L/R
• MONITOR SELECT : 2TR IN
• MONITOR LEVEL Maximum
• Other conditions are in standard state.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
