Yamaha MCR-040DG, Руководство пользователя

Страница: 16 / 26

USING USEFUL FUNCTIONS
12
En
■
Adjusting the clock
CLOCK SET: To set hour and minute, repeat steps 3 and 4 on page 11.
y
The current time appears on the front panel display for a certain period by pressing and holding DISPLAY if the time setting has
completed.
The time setting is lost once the power cable is disconnected from the wall outlet.
■
Setting the timer
TIMER SET: To select the following setting items, repeat steps 3 and 4 on page 11.
y
You can enter TIMER SET directly by pressing and holding TIMER .
Note
Time (hour and minute)
Running time
You can choose the running time from 10 minutes to 90 minutes in 10 minute increments.
“– –” means the unit will not be set to standby mode automatically.
Input source and track/file number or preset number
• If the source is not set properly, the timer sound will not be heard. Make sure that the source is set securely.
• MCR-140: When you select an iPod as the input source, you need to set the iPod in the charging cradle on the unit.
iPod:
When you select the iPod as a source, this unit resumes the music that you were listening to last time.
CD:
Set a track/file number.
If you set the track/file number which is not exist, the first track/file is played back automatically.
USB:
Set a file number.
If you set a file number that does not exist, the first file is played back automatically.
FM:
Set preset number.
By selecting “– –”, the FM station you set last time is set.
Timer ON/OFF
Switch the timer on/off. When the timer is on, the TIMER indicator lights up on the front panel display
(
☞
P. 6).
y
This setting is also available with TIMER (
☞
P. 6, 13).
Notes