Yamaha MCP1, Руководство по установке

Страница: 6 / 24

6 MCP1 Installation Man u al
Introduction
Thank you for purchasing the Yamaha MCP1 wall-mount controller. This product is a
wall-mount controller for controlling the MTX/MRX system. This installation manual
explains how to mount the unit when the installing technician or the designer installs or
sets-up the system. In order to take full advantage of this product’s many functions, be
sure to read this installation manual before installation.
After reading this manual, keep it for future reference.
The MCP1 lets you set up a home page and six pages, and assign up to 36 parameters.
What you’ll need to provide
W hen attaching the MCP1 to a w all, yo u ’ll need to pro v ide se v eral items.
• PoE injector or PoE network switch that supports IEEE802.3af
This is u sed b et w een the MTX/MRX system and the MCP1 in order to s u pply po w er to the
MCP1.
PoE injector
u nits and PoE net w ork s w itches are collecti v ely referred to as “PSE (Po w er
So u rcing Eq u ipment).”
• Ethernet cables (CAT5e or better)
These are u sed b et w een the MTX/MRX and the PSE, and b et w een the PSE and the MCP1.
• (If embedding the unit in the wall)
2-gang box (without separator; 20 mm or greater depth)
Yo u ’ll also need scre w s for attaching the gang b ox to the w all.
• (If using a surface mount box)
Screws for attaching the surface mount box to the wall × 4
Pro v ide M4.0 flat head scre w s of a length appropriate for the thickness of the w all.
• Phillips screwdriver / electric screwdriver
This is u sed for installation.