manualshive.com logo in svg

Yamaha M06, Руководство пользователя, Страница: 230 / 240

Поделиться
Скачать
Yamaha M06 Скачать руководство пользователя страница 230

Appendix

Troubleshooting

230

Owner’s Manual

■ 

Song/Pattern (Phrase) cannot be recorded.

• Is there enough free memory for recording? The total memory capacity determines the number of Songs/Patterns 

(phrases) that can be recorded. For example, if the memory contains Songs/Patterns (phrases) that use up a large 
amount of memory, the memory may become full even though the available Pattern or Song numbers are not all used. 

• In the Pattern Record mode, does the specified track to which the Phrase is assigned have preset data? Recording 

cannot be done to a track that contains preset data.

■ 

Cannot enter the Pattern Job mode/Pattern Mixing mode.

• Check whether this instrument is in the Pattern Chain mode or not. If so, exit from the Pattern Chain mode, then press the 

[JOB] button or [MIXING] button.

■ 

The drum sound is wrong or unexpected when changing the transpose value.

• This is normal. Changing the transpose setting while playing a Drum Voice will produce different sounds for the same keys 

played.

■ 

Data communication between the computer and this instrument does not work properly.

• Check whether the Port setting on the computer is appropriate or not.

• Is the cable setting (MIDI, USB) in the Utility mode appropriate?

■ 

This instrument does not sound properly even when playing back song data on a computer or a MIDI 
instrument connected to this instrument.

• Make sure to set this instrument to the Song mode or Pattern mode. To play back multiple channels simultaneously, Song 

mode or Pattern mode must be selected.

■ 

MIDI bulk data transmission/reception does not work properly.

• Is Bulk data receive protection enabled?

Turn the Receive Bulk parameter to “on.”

• When receiving recorded data with the internal Bulk Dump function, the device number must be set to the same value as 

that used when transmitting/recording.

• When transmission does not work properly, is the device number of the MIDI instrument connected to this instrument set 

to match the DeviceNo. parameter?

• When using the Voice Editor/Multi Part Editor, have you set a sufficient Dump Interval? 

The Dump Interval in the Editor Setup dialog must be set to 20ms or greater. For details refer to the PDF manual included 
with the Editor.

■ 

Data cannot be saved in the USB storage device

• Is the connected USB storage device write protected? (Write-protect should be set to off for saving data.)

• Is the connected USB storage device properly formatted?

■ 

Cannot enter the Edit mode

• Is the Category Search function turned on?

After exiting from the Category Search function, press the [EDIT] button.

• Is this instrument in the File mode?

After exiting from the File mode, press the [EDIT] button.

[UTILITY] 

→

 [F5] MIDI 

→

 [SF4] OTHER 

→

 MIDI IN/OUT (page 210)

[UTILITY] 

→

 [F5] MIDI 

→

 [SF2] SWITCH 

→

 RcvBulk (page 209)

[UTILITY] 

→

 [F5] MIDI 

→

 [SF1] CH 

→

 DeviceNo. (page 209)

[UTILITY] 

→

 [F5] MIDI 

→

 [SF1] CH 

→

 DeviceNo. (page 209)

[FILE] 

→

 [F1] CONFIG 

→

 [SF2] FORMAT (page 211)

Содержание M06

















































































































































































































































Отзывы:

Нет отзывов