47
Appendices
This section describes how to replace the lamp and the air filter.
It is time to replace the lamp when:
••••
The message "Lamp Replace" appears on the screen when projection starts.
••••
The LAMP/COVER indicator flashes orange or lights red.
••••
The projected image gets darker or starts to deteriorate.
Replacing Consumables
Lamp Replacement Period
••••
In order to maintain the brightness and quality of the projected images, replace the lamp as
soon as possible after the warning message appears.
••••
The replacement warning message is set to appear after 2900 hours of lamp use in order to
maintain the brightness and quality of the projected images. If you continue to use the lamp after
this period, the possibility of the lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if it is still
working.
••••
The warning message appears after 2900 hours of use, but the actual life of each individual
lamp will vary depending on the characteristics of the lamp and on the way it has been used.
Some lamps may stop operating before 2900 hours of use, so you should always have a spare
lamp ready in case.
••••
When the lamp replacement warning message appears, the user's logo will not appear even if
the “Startup Screen” setting is “ON”.
••••
Contact your dealer for a spare lamp.
A message will be displayed.
The message appears for 30 seconds, and disappears again
after 30 seconds have passed.
Lamp indicator flashes orange or lights red.
Cleaning
Replacing Consumables
Содержание LPX-500
Страница 1: ...OWNER S MANUAL LPX 500 Home Cinema Projector an English 403256900 U C A G B R T ...
Страница 8: ...3 Accessories Check the included accessories Remote control Setup guide Battery LR6 AA x 2 Power cord ...
Страница 59: ...56 Appearance 281 11 06 125 4 92 409 16 1 111 4 37 Units mm inch ...