6
To stop playback:
Press the
&
button.
To fast forward the tape:
Press the
⁄
button.
To fast rewind the tape:
Press the
!
button.
To adjust the volume level:
Use the volume control of the amplifier or receiver.
To use headphones for private listening:
Insert the headphones plug into the
PHONES
jack.
To adjust the headphones level:
Use the
PHONES LEVEL
control.
DOLBY NR button setting (in step 2)
DOLBY NR (OFF/ B/ C/MPX) button
Be sure to set the
DOLBY NR (OFF/
B/
C/MPX)
button according to the system used for recording. Each
time this button is pressed, Dolby NR switches as follows:
B(MPX OFF) For a tape recorded with DOLBY B NR
Only the B indicator lights.
C(MPX OFF) For a tape recorded with DOLBY C NR
Only the C indicator lights.
B MPX ON
(available only for recording)
C MPX ON
(available only for recording)
OFF
For a tape recorded with DOLBY NR
OFF
No indicator lights.
Note
: The MPX filter settings are explained on page 9.
PLAY TRIM control adjustment
When the level of high frequencies is too boosted or
absent while playing a tape recorded on another cassette
deck, adjust the high frequency response with the
PLAY
TRIM
control.
When high frequencies are
absent, boost the high
frequencies.
When high frequencies are
too boosted, attenuate the
high frequencies.
∞
∞
∞
∞
20
100
1k
10k 20k Hz
10 dB
10 dB
Noise Reduction Responce
NR-OFF
B-NR
C-NR
3
KX-493
KX-393
PLAY TRIM
PLAY TRIM
0
0
PLAY TRIM
PLAY TRIM
0
0
100
10 dB
1k
10kHz
1
2
3
1
High frequency sound is
too boosted.
2
Flat.
3
High frequency sound is
absent.
