manualshive.com logo in svg

Yamaha KODIAK YFM4FAV, Руководство пользователя

Поделиться
Скачать
Yamaha KODIAK YFM4FAV Скачать руководство пользователя страница 33

4-11

EBU01159

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is
pushed to the maximum. Turning in the ad-
justing screw limits the maximum engine pow-
er available and decreases the maximum
speed of the ATV.

1. Locknut

2. Adjusting screw

a. No more than 12 mm (0.47 in)

WARNING

POTENTIAL HAZARD 
Improper adjustment of the speed limit-
er and throttle. 
WHAT CAN HAPPEN 
The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an acci-
dent or be injured. 
HOW TO AVOID THE HAZARD 
Do not turn the adjusting screw out
more than 12 mm (0.47 in). Always make
sure the throttle lever free play is adjust-
ed to 3.0–5.0 mm (0.12–0.20 in). See
page 8-38.

EE.book  Page 11  Friday, May 6, 2005  2:55 PM

Содержание KODIAK YFM4FAV


































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды