Yamaha Kodiak YFM45FAV Скачать руководство пользователя страница 64

Страница: 64 / 194

6-5

Shifting: Neutral to Reverse and Reverse
to Park

NOTE:

The drive select lever cannot be shifted into or
from reverse or park without applying the rear
brake.

1. Bring the ATV to a complete stop and re-

turn the throttle lever to the closed posi-
tion.

2. Apply the brake pedal.
3. Shift from neutral to reverse or from re-

verse to park and vice versa by moving
the drive select lever along the shift
guide.

1. Drive select lever

NOTE:

●

When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a Yamaha dealer to inspect
the electrical circuit.

●

Due to the synchronizing mechanism in
the engine, the light may not come on un-
til the ATV starts moving.

4. Check behind for people or obstacles,

and then release the brake pedal.

EE.book Page 5 Friday, May 6, 2005 8:59 AM

Содержание Kodiak YFM45FAV



































































































































































































Результаты поиска

Содержание Kodiak YFM45FAV

Отзывы:

Бренды по названию

Популярные бренды

Yamaha Kodiak YFM45FAV, Руководство пользователя

Результаты поиска

Содержание Kodiak YFM45FAV

Отзывы:

Бренды по названию

Популярные бренды