Yamaha KODIAK 700 Скачать руководство пользователя страница 144

Страница: 144 / 172

8-55

3. Remove the battery holding plate by remov-

ing the nuts.

4. Disconnect the negative battery lead first,

then the positive battery lead by removing
their bolt.

NOTICE:

When removing the bat-

tery, the main switch must be off, and the
negative lead must be disconnected be-
fore the positive lead.

[ECB01002]

5. Pull the battery out of its compartment.

NOTICE

ECB00622

Never attempt to open the battery or remove
the battery cell seals, as this would permanent-
ly damage the battery.

To charge the battery



Confirm the recommended charging rate as
specified on the battery itself.



Select a suitable charger and follow the manu-
facturer’s instructions.

NOTICE

ECB00933

To charge a VRLA (valve-regulated lead-acid)
battery, a special battery charger is required.
Using a conventional battery charger will dam-
age the battery.

To store the battery



If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.



If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.

1. Battery holding plate
2. Nut
3. Negative battery lead (black)
4. Positive battery lead (red)

UB1662E0.book Page 55 Monday, April 17, 2017 11:39 AM

Содержание KODIAK 700













































































































































































Результаты поиска

Содержание KODIAK 700

Отзывы:

Бренды по названию

Популярные бренды

Yamaha KODIAK 700, Руководство пользователя

Результаты поиска

Содержание KODIAK 700

Отзывы:

Бренды по названию

Популярные бренды