Yamaha KODIAK 700 YFM70KDHG, Руководство пользователя

Страница: 66 / 180

6-1
6
EBU19882
OPERATION
EBU19902
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWB00632
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU34160
Starting the engine
NOTICE
ECB00151
See the “Engine break-in” section on page 6-4
prior to operating the engine for the first time.
1. Turn the key to “ ” (on) and the engine stop
switch to “ ”.
The EPS warning light (for equipped models)
should come on and stay on until the engine
is started.
The following warning lights should come on
for a few seconds, then go off.

Coolant temperature warning light

Engine trouble warning light

Fuel level warning light (for equipped mod-
els)
NOTICE
ECB00825
If a warning light does not go off, see page 4-2
for the corresponding warning light circuit
check. To avoid possible damage, do not oper-
ate the ATV if a warning light stays on.
2. Apply the brake pedal, and then shift the drive
select lever into the neutral or park position.
The corresponding indicator light should
come on. If the indicator light does not come
on, have a Yamaha dealer check the electrical
circuit.
TIP
This model is equipped with an ignition circuit cut-
off system. The engine can be started under the
following conditions:
UB1660E0.book Page 1 Thursday, February 26, 2015 4:01 PM